£567.99 – £597.99Price range: £567.99 through £597.99
Choose the exact RCM Superstud specification: 14/12mm with M12 × 1.25 head-end hardware, or 14/14mm with 9/16-18 UNF hardware. Both require block machining; the 14/14mm option also needs head-clearance machining and separate RCM2726 dowels. Check your engine-builder specification before ordering.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
RCM Superstud cylinder head stud kits
Choose the Superstud specification matched to your Subaru EJ engine build. Both kits use S99 high-tensile steel studs with precision-rolled threads, an M14 × 2 block end and a 197mm stud length. The head-end threads and supplied hardware differ, so select the exact kit specified by your engine builder.
Choose your specification
- 14/12mm – RCM2903: M12 × 1.25 head-end thread, with matching M12 ARP 8740 chromoly 12-point nuts and washers.
- 14/14mm – RCM2902: 9/16-18 UNF head-end thread, with matching 9/16-inch ARP 8740 chromoly 12-point nuts and washers. This is not the M14 × 1.5 head-end thread used by RCM593.
Contents
Each selected kit supplies 12 RCM head studs, 12 matched ARP nuts, 12 matched ARP washers, RCM assembly lubricant and its fitting guide. The stud-end hex assists installation.
Fitment and machining — read before ordering
For suitably prepared Subaru EJ20, EJ22 and EJ25 block cases. Both options require block machining for the M14 studs. The 14/14mm RCM2902 option also requires cylinder-head clearance machining and separate RCM2726 head-locating dowels. Confirm head, dowel and gasket clearances with your engine builder. RCM specifies its RCM910 tapered reamer for modifying non-RCM head gaskets used with these kits.
Follow the fitting guide and lubricant requirements for the exact selected kit. Do not transfer the tightening procedure between specifications:
Other stud families
The RCM593 standard 14/14mm kit, RCM1540 Extreme 11mm kit and Crest billet-block-specific kits are separate products with different requirements.
Additional information
| Weight | 2 kg |
|---|---|
| Dimensions | 45 × 25 × 20 cm |
| Engine | Subaru EJ20 / EJ22 / EJ25 |
| Block-end thread | M14 × 2 |
| Head-end thread | M12 × 1.25 (RCM2903), 9/16-18 UNF (RCM2902) |
| Stud length | 197 mm |
| Contents | 12 head studs plus matched hardware and lubricant |
| Stud specification | 14/12mm – M12 × 1.25 head end, 14/14mm – 9/16-18 UNF head end |
Related products
-

Timing Belt & Water Pump Kit with Cosworth Belt – Impreza WRX/STI V1–V2
£429.99 – £558.39Price range: £429.99 through £558.39 Select options -

Timing Belt & Water Pump Kit with Genuine Subaru Belt – Impreza WRX/STI V3–V4
£309.99 – £438.39Price range: £309.99 through £438.39 Select options -

RCM Black Series Thermostatic Oil Sandwich Plate – RCM3334
£141.99 Add to basket -

RCM Black Series Dual-Port Angled Oil Sandwich Plate – SPE849
£201.94 Add to basket










