£447.99

Choose RCM157 14/12mm with M12 × 1.25 head-end threads or RCM593 14/14mm with M14 × 1.5 threads. Both need block machining; RCM593 also needs head-clearance machining and separate RCM2726 dowels. Includes 12 studs, matched nuts, lubricant and fitting guide.

Non Stock Item – Ordered In
Typical lead time: 1–3 working days, subject to supplier stock.

Description

RCM S99 cylinder head stud kits

Choose the 14/12mm or 14/14mm specification required for your Subaru EJ engine build. These RCM kits use S99 high-tensile steel studs, a 197mm stud length and an M14 × 2 block-end thread. The head-end threads and matched nuts differ between choices.

Choose the correct kit

  • 14/14mm – RCM593: M14 × 1.5 head-end thread. Requires block machining, cylinder-head clearance machining and separate RCM2726 head-locating dowels.
  • 14/12mm – RCM157: M12 × 1.25 head-end thread. Requires block machining; the supplier states that cylinder-head modification is not required for this kit.

What is supplied

Each selection supplies 12 RCM head studs, 12 matched high-tensile nuts, assembly lubricant and a fitting guide. Engine and block photographs illustrate installation; those components are not included.

Fitment and installation

For appropriately prepared Subaru EJ20, EJ22 and EJ25 series block cases. Both options require the block to be re-engineered for the larger studs and are not direct replacements for standard head bolts. Have an engine builder confirm the block, head, dowel and gasket clearances before ordering.

The 14/14mm RCM593 kit requires separate RCM2726 head-locating dowels. RCM specifies its RCM910 tapered reamer for modifying non-RCM head gaskets used with RCM593.

Fitting guides

Use the specified lubricant and the instructions for the selected kit. Do not transfer tightening procedures between specifications.

Other stud families

The RCM Superstud kits with ARP nuts and washers, Extreme 11mm kits and Crest billet-block-specific kits are separate families. In particular, RCM593 uses M14 × 1.5 head-end threads rather than the 9/16-18 UNF head end of the RCM2902 Superstud.

Additional information

Weight 2 kg
Dimensions 45 × 25 × 20 cm
Engine

Subaru EJ20 / EJ22 / EJ25

Block-end thread

M14 × 2

Head-end thread

M14 × 1.5 (RCM593), M12 × 1.25 (RCM157)

Stud length

197 mm

Contents

12 head studs plus matched hardware and lubricant

Stud specification

14/14mm – M14 × 1.5 head end, 14/12mm – M12 × 1.25 head end

Brand

Roger Clark Motorsport

Browse Roger Clark Motorsport (RCM) Subaru engine, cooling, performance and workshop products at MB Developments. Check the exact engine, model application and selected kit contents.

You may also like…

  • RCM2903 14/12mm Superstud kit with M12 head-end hardware, view 1

    RCM Superstud Cylinder Head Stud Kit – 14/12mm or 14/14mm

    Price range: £567.99 through £597.99
    Select options
  • RCM2726 four head dowels for 14mm stud conversion

    RCM Head-Locating Dowel Kit – 14mm Stud Conversion

    £69.94
    Add to basket
CONTACT
💬 WhatsApp ☎ Call Us ✉ Email Us