£837.99
Four RCM/Omega forged pistons with rings, gudgeon pins and circlips. Choose 99.50, 99.75 or 100.00 mm finished bore for the EJ25 high-compression family with a 79 mm crankshaft stroke and 11 cc piston bowl. Confirm the complete build and required machining before ordering.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
RCM/Omega high-compression forged pistons for EJ25 builds
Choose the finished bore required for your EJ25 engine build: 99.50 mm standard bore, 99.75 mm oversize or 100.00 mm oversize. These three options are the same supplier-defined high-compression family for a 79 mm crankshaft stroke. They are not the separate EJ20, EJ22 stroker or other bowl-volume piston families.
Kit contents and manufacture
- Four forged pistons, piston rings, gudgeon pins and circlips
- 2618A aerospace-alloy construction, manufactured by Omega for RCM
- CNC machined under controlled 20.5°C conditions
- Individually weighed and batched to within 0.5 grams
- Exact manufacturer part number, price, stock and photograph follow the selected bore
Engine build and compression
RCM specifies a 79 mm crankshaft and pistons sitting 0.30 mm below the deck. The higher deck-height design retains the original EJ25 STI piston bowl shape and 11 cc bowl volume. The 11 cc figure describes the piston bowl; it is not engine displacement, bore diameter or compression ratio.
The supplier quotes 9.481:1 compression with standard EJ25 STI cylinder heads and a 0.6 mm head gasket, or 10.156:1 with EJ20 STI single-AVCS cylinder heads and a 0.6 mm gasket. These are the supplier’s stated build examples, not a guaranteed ratio for every bore, head or assembled engine. Your engine builder must calculate the actual compression ratio, clearances and suitability for the components used. No additional displacement or compression figures are inferred for the oversize options.
Choosing the correct bore and fitting
RCM identifies this family for its V9+ WRX/STI EJ25 application; the actual block, crankshaft and cylinder-head combination must match the planned build. Ask your engine builder to measure the block and specify the finished bore before ordering. Professional machining, assembly and clearance checks are required; an oversize piston is not a substitute for measuring and preparing the block.
Follow the RCM piston installation instructions for the applicable piston clearance and ring-gap procedures. Supplier family photographs illustrate the piston design and contents; the selected part number and finished bore identify the set supplied.
Additional information
| Weight | 12 kg |
|---|---|
| Dimensions | 30 × 30 × 15 cm |
| Engine build | EJ25 high compression – 79 mm crankshaft stroke |
| Finished bore | 99.50 mm, 99.75 mm, 100.00 mm |
| Piston bowl volume | 11 cc |
| Quantity | Four pistons with rings, gudgeon pins and circlips |











