Price range: £359.99 through £627.99
RCM 11mm head-stud kits for Subaru EJ20, EJ22 and EJ25 engines. Choose High Performance RCM1635 or Extreme RCM1540. Each kit includes 12 studs, nuts, washers, lubricant and fitting instructions. M11 × 1.25 threads, 197mm stud length.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
RCM 11mm head-stud kits for Subaru EJ engines
Choose the High Performance or Extreme specification for your Subaru EJ20, EJ22 or EJ25 engine build. Both kits use 197mm studs with M11 × 1.25 threads at the block and cylinder-head ends. The selector identifies the exact RCM kit; each choice has its own price and product photograph.
Choose the kit specification
- High Performance – RCM1635: S99-steel studs with a manufacturer-certified minimum yield strength of 1080 MPa. RCM identifies ARP nuts and washers in this kit.
- Extreme – RCM1540: aircraft-grade S99-steel studs with RCM’s stated tensile strength above 237,000 psi (1,640 MPa). RCM recommends this specification for engines running up to around 500 bhp. This is a manufacturer application recommendation, not a promise of vehicle power or head-gasket sealing.
Yield strength and tensile strength are different measurements; the figures above should not be treated as directly equivalent ratings.
Contents of each selected kit
- 12 studs of the selected specification, 197mm long.
- 12 heat-treated nuts and 12 heat-treated washers.
- RCM assembly lubricant and a fitting instruction guide.
The cylinder-head photograph illustrates installation only. A cylinder head is not included.
Fitment and engine-build checks
RCM specifies these kits for EJ20, EJ22 and EJ25 engines. Confirm the actual engine code, block threads, cylinder heads and machining before ordering, particularly on converted engines. The Extreme kit is specified as a direct fit in the standard block assembly without block modification. These 11mm kits do not establish compatibility with a block machined for 14mm studs.
Use the supplied RCM assembly lubricant and follow the complete staged tightening procedure and sequence for the selected kit: RCM1635 fitting guide or RCM1540 Extreme fitting guide. Professional engine assembly and clearance checks remain essential.
For a different block-machining plan, see the separate RCM Superstud 14mm kit family; select the kit for the actual build.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Kit specification | High Performance – RCM1635, Extreme – RCM1540 |
















