£153.99 – £177.99Price range: £153.99 through £177.99
ACL Race Series main and big-end bearing sets for rear thrust at position 5. Select each bearing set size: STD, 0.25 mm Os or 0.50 mm Os. All nine supplier-defined pairings are available as separate choices. Match the actual cases, crankshaft machining and measured clearances; supplier Os labels are retained.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
ACL Race Series rear-thrust main and big-end bearing kits
Choose the main-bearing size and the connecting-rod big-end size for your engine build. Every selectable option contains one rear-thrust main bearing set, with thrust at position 5, plus one big-end bearing set. These are complete bearing-set combinations; individual shells are not offered by this listing.
Verified size combinations
- STD mains / STD big ends – supplier kit reference RCM3461.
- STD mains / 0.25 mm Os big ends – supplier kit reference RCM1074-1287.
- STD mains / 0.50 mm Os big ends – supplier kit reference RCM1074-2382.
- 0.25 mm Os mains / STD big ends – supplier kit reference RCM1286-1075.
- 0.25 mm Os mains / 0.25 mm Os big ends – supplier kit reference RCM3478.
- 0.25 mm Os mains / 0.50 mm Os big ends – supplier kit reference RCM1286-2382.
- 0.50 mm Os mains / STD big ends – supplier kit reference RCM2462-1075.
- 0.50 mm Os mains / 0.25 mm Os big ends – supplier kit reference RCM2462-1287.
- 0.50 mm Os mains / 0.50 mm Os big ends – supplier kit reference RCM3479.
All nine combinations listed here are explicitly offered by the supplier. Each choice has its own kit reference, price and availability; choose both sizes before adding to your basket.
Size terminology
STD means the supplier’s standard-size option. The 0.25 mm Os and 0.50 mm Os labels reproduce the supplier’s size designations. They do not state an assembled oil clearance, finished housing diameter or thrust-face machining allowance. Confirm the exact bearings and crankshaft machining required with your engine builder before ordering. No ACL manufacturer part number is inferred from an RCM kit reference, and no HX extra-clearance specification is implied.
Race Series features
- Tri-metal bearing construction.
- High-strength overlay with reduced thickness for fatigue resistance.
- Hardened steel backs on the rod bearings to support retention.
- Increased crush for retention in the bearing housings.
- Unplated bearing backs to assist heat transfer and housing grip.
- Increased eccentricity to support oil-film formation under bore distortion.
- Three-quarter-grooved main bearings for load area and connecting-rod oil flow.
- Consistent wall thickness to help maintain bearing clearances.
- Inner-edge chamfers where required for performance crankshaft fillet clearance.
Fitment and build checks
The supplier’s rear-thrust EJ engine guide covers 1998–2017 and specifies rear thrust for engines after 08/1998. Match the actual engine cases, thrust arrangement, crankshaft journal machining and measured bearing clearances. These broad engine-family dates do not confirm every vehicle or modified engine.
This kit is for rear thrust at position 5. Centre-thrust, converted dual-thrust, main-only and big-end-only packs are separate products. Registration year alone is not sufficient to identify the actual case or crankshaft configuration.
Photograph and installation
The genuine supplier photograph illustrates the rear-thrust main and big-end bearing family. The selected main and big-end sizes and kit reference identify the combination supplied; packaging appearance does not identify a size.
Professional engine assembly and clearance checks are required. For assembly checks, see the separately supplied Plastigauge bearing-clearance gauges; select the range appropriate to the clearance being checked.
Additional information
| Weight | 2 kg |
|---|---|
| Dimensions | N/A |
| Bearing pack | Main bearing set plus connecting-rod big-end bearing set |
| Thrust position | Rear thrust – position 5 |
| Main bearing size | STD, 0.25 mm Os, 0.50 mm Os |
| Big-end bearing size | STD, 0.25 mm Os, 0.50 mm Os |
You may also like…
Related products
-

Genuine Subaru Engine Gasket Kit EJ20G WRX V1/2
£505.65 Read more -

RCM 4 Stage Dry Sump System EJ20/22/25
£4,917.99 Add to basket -

Genuine Subaru Valve Collet Set – 32 Pieces
£97.99 Add to basket -

RCM/Cosworth Timing Belt Kit – Impreza WRX/STI V5–V7
£327.99 – £387.99Price range: £327.99 through £387.99 Select options


