Price range: £1,398.60 through £2,197.80
Universal Link G4X XtremeX wire-in ECU for up to 8 cylinders or 4 rotors in sequential/direct-spark operation. Select ECU only, the official A/B loom and sensor bundle, or the terminated LS harness package. Custom wiring, professional setup and tuning required. Pictures may vary from the actual product supplied; check the selected package contents.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
Link G4X XtremeX universal wire-in ECU
The XtremeX provides programmable engine management for a custom installation that needs premium G4X features and flexible inputs and outputs. Choose ECU only, the verified Link wiring-and-sensor bundle or the terminated LS harness package below. This is a universal wire-in ECU, not a direct replacement for a vehicle-specific plug-in ECU.
Useful features
- Supports up to 8 cylinders or 4 rotors with sequential injection and direct spark.
- Programmable electronic-throttle control with correctly engineered wiring and safety configuration.
- VVT, closed-loop boost and configurable engine protection using suitable sensors.
- Dual CAN modules, trigger oscilloscope and 512 MB onboard logging.
- Expanded inputs and outputs with advanced motorsport functions including traction and gear-shift control.
Choose your package
ECU only – 109-4000: includes the ECU, mounting bracket, USB tuning cable, quick-start guide and Link stickers. A wiring loom, mating connector kit and external sensors are not included in this choice.
Official bundle – 109-9300B: XtremeX ECU package, 2.5 m A and B looms, CAN Lambda wideband controller with Bosch LSU 4.9 sensor, Link 4-bar absolute MAP sensor and 1/8-inch NPT IAT sensor. The MAP sensor measures absolute pressure; 4 bar absolute is approximately 3 bar boost at sea level. These looms require installation and are not a vehicle-specific terminated LS harness.
Terminated LS harness package – 109-9000B
This official package includes the XtremeX ECU, terminated GM LS Gen 3/4 engine harness and LS DBW adapter loom for electronic throttle. It is a different choice from the loose A/B loom and sensor bundle. Select the package that matches your throttle system.
Gen 4 engines require additional checks and parts: a cam-sensor harness extension and crank-sensor connector modification are needed. Most Gen 4 injectors need USCAR adapters 101-0287. Factory Gen 4 knock sensors need adapter loom 101-0306. The factory Gen 4 MAP sensor needs a Link LS MAP adapter plus a Gen 3-to-Gen 4 extension, or use a compatible Link MAP sensor. Check your actual connectors and sensors.
Fuse box and relay assembly 101-0310 is sold separately. Do not assume every LS installation is plug-and-play or that the additional adapters, sensors or fuse box are included. Contact Link ECU for the exact LS harness installation manual before installation. Professional wiring checks, configuration and tuning remain necessary.
Pictures may vary from the actual product supplied. The LS package uses Link’s product photograph; the exact contents are those listed above.
Installation and support
Professional wiring, configuration and tuning are required. Plan all channel assignments and confirm compatibility with the engine, throttle, sensors and any transmission controls; features share limited inputs and outputs. Mount the ECU inside the cabin away from moisture, heat and ignition interference. New units require supplier activation before running the engine.
Read the XtremeX quick-start guide and the full wiring and installation manual within PCLink. MB Developments offers custom wiring, installation, setup and custom dyno mapping by enquiry. Additional sensors and services are separate. Link specifies off-road use only, not highway use.
Additional information
| Package | ECU only, ECU + 2.5 m A/B looms + sensor bundle, ECU + terminated LS harness – electronic throttle (109-9000B) |
|---|---|
| ECU wiring & setup (PCLink) |







