Price range: £1,020.60 through £1,269.00
Link G4X plug-in ECU choices for compatible manual Mazda MX-5 NA, NB1 and NB2 models. Select the exact engine/version and check the ECU connector. Installation, setup and tuning required.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
Link G4X ECU for Mazda MX-5 NA, NB1 and NB2
Choose the ECU matched to your engine, model version and factory connector. These Link plug-in boards fit the compatible original ECU enclosure and give your tuner control of fuelling, ignition and supported engine functions through PCLink. Professional installation, setup and tuning are required.
Useful features
- Programmable fuel and ignition maps for your engine specification.
- Onboard MAP sensing; the actual sensor revision must be checked during calibration.
- Data logging to help your tuner review how the engine runs.
- Expansion connections for supported additional sensors and functions.
- PCLink software for configuration, logging and tuning.
Select the correct version
- MX5NAX, 212-4000: NA 1.6 from 1989–1997 or NA 1.8 from 1994–1997.
- MX5NB2X, 239-4000: 2001–2005 NB2 1.8 VVT naturally aspirated or non-VVT Mazdaspeed turbo application, with the 72-pin connection.
These applications are manual-transmission only. Check the connector against the photograph. Engine swaps and wiring changes need individual checks. Each option has its own installation notes; NA fuel-pump/TPS wiring and NB board revisions need particular attention.
NB1 1.8 non-VVT option – 240-4000
The MX5NB1X is for the pre-facelift Mazda MX-5 NB1, model years 1998–2000, with the non-VVT 1.8-litre engine and three-plug ECU connection. Manual transmissions only. Compare the connector with the NB1 photograph; it is different from the NA and NB2 choices.
The NB1 has onboard MAP sensing. Electronic throttle requires the appropriate expansion connector and correctly engineered hardware and wiring. CAN accessories use the four-pin powered CANJST4 cable, Link 101-0198; the old CANPCB cable is not compatible. Contact Link ECU for the NB1 installation manual before installation and confirm the exact board revision and setup requirements.
Installation and accessories
A base configuration is a starting point for setup. Additional sensors, expansion wiring and electronic-throttle hardware depend on the selected ECU and installation. Sensor packs and custom wiring looms are available separately; contact us about installation, setup and custom dyno mapping. Follow the exact Link installation manual and intended-use guidance for your chosen option.
Version-specific buying checks
For NA 1.6 cars, an analogue TPS and fuel-pump wiring changes may be needed, particularly when removing the factory air-flow meter. NA electronic throttle requires modification and additional control hardware. Check whether the onboard MAP sensor is the 4-bar or 7-bar revision. NA bottom boards V1.4 and earlier have incorrect labels for An Volt 10 and 11 on the expansion plugs.
NB2 boards PCB version 04 and older need Link’s VVT correction before use. The NA and Mazdaspeed configurations use different jumper settings. NB2 CAN accessories need the four-pin CANJST4 connection; electronic throttle needs the additional expansion connection and suitable hardware. Check the exact board revision before installation.
Included are the selected ECU board, anti-static strap, USB tuning cable, stickers and manual/registration cards. The original ECU enclosure is reused. Additional sensors and expansion looms are separate. Link specifies off-road use; check the intended use before ordering. Read the NA installation manual or NB2 installation manual for your selected option.
Additional information
| Year and version | NA 1.6 1989–1997 / 1.8 1994–1997 – MX5NAX, NB2 2001–2005 1.8 VVT / Mazdaspeed turbo, 72-pin – MX5NB2X, NB1 1998–2000 1.8 non-VVT, three-plug – MX5NB1X |
|---|---|
| ECU wiring & setup (PCLink) |









