£447.99
Choose RCM157 14/12mm with M12 × 1.25 head-end threads or RCM593 14/14mm with M14 × 1.5 threads. Both need block machining; RCM593 also needs head-clearance machining and separate RCM2726 dowels. Includes 12 studs, matched nuts, lubricant and fitting guide.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
RCM S99 cylinder head stud kits
Choose the 14/12mm or 14/14mm specification required for your Subaru EJ engine build. These RCM kits use S99 high-tensile steel studs, a 197mm stud length and an M14 × 2 block-end thread. The head-end threads and matched nuts differ between choices.
Choose the correct kit
- 14/14mm – RCM593: M14 × 1.5 head-end thread. Requires block machining, cylinder-head clearance machining and separate RCM2726 head-locating dowels.
- 14/12mm – RCM157: M12 × 1.25 head-end thread. Requires block machining; the supplier states that cylinder-head modification is not required for this kit.
What is supplied
Each selection supplies 12 RCM head studs, 12 matched high-tensile nuts, assembly lubricant and a fitting guide. Engine and block photographs illustrate installation; those components are not included.
Fitment and installation
For appropriately prepared Subaru EJ20, EJ22 and EJ25 series block cases. Both options require the block to be re-engineered for the larger studs and are not direct replacements for standard head bolts. Have an engine builder confirm the block, head, dowel and gasket clearances before ordering.
The 14/14mm RCM593 kit requires separate RCM2726 head-locating dowels. RCM specifies its RCM910 tapered reamer for modifying non-RCM head gaskets used with RCM593.
Fitting guides
Use the specified lubricant and the instructions for the selected kit. Do not transfer tightening procedures between specifications.
Other stud families
The RCM Superstud kits with ARP nuts and washers, Extreme 11mm kits and Crest billet-block-specific kits are separate families. In particular, RCM593 uses M14 × 1.5 head-end threads rather than the 9/16-18 UNF head end of the RCM2902 Superstud.
Additional information
| Weight | 2 kg |
|---|---|
| Dimensions | 45 × 25 × 20 cm |
| Engine | Subaru EJ20 / EJ22 / EJ25 |
| Block-end thread | M14 × 2 |
| Head-end thread | M14 × 1.5 (RCM593), M12 × 1.25 (RCM157) |
| Stud length | 197 mm |
| Contents | 12 head studs plus matched hardware and lubricant |
| Stud specification | 14/14mm – M14 × 1.5 head end, 14/12mm – M12 × 1.25 head end |
You may also like…
Related products
-

RCM Black Series Dual-Port Angled Oil Sandwich Plate – SPE849
£201.94 Add to basket -

RCM Titanium Wheel Nut Set – 20 × M12 × 1.25
£237.99 Add to basket -

Timing Belt & Water Pump Kit with Cosworth Belt – Impreza WRX/STI V3–V4
£369.99 – £498.39Price range: £369.99 through £498.39 Select options -

STI Sports Parts Timing Belt & Water Pump Kit – Impreza WRX/STI V3–V4
£459.99 – £588.39Price range: £459.99 through £588.39 Select options












