Price range: £1,977.99 through £2,997.99

RCM EJ20 2.1 stroker component kits with a 79mm Subaru forged crankshaft, Omega pistons and ACL Race bearings. Choose Budget forged – Manley rods or Forged – Arrow rods, then the exact piston size. Case seals and sealer are included with the Arrow option only. Block machining and early closed-deck rear-thrust conversion are required.

Non Stock Item – Ordered In
Typical lead time: 1–3 working days, subject to supplier stock.

Description

RCM EJ20 2.1 Forged Stroker Kits

Choose the kit specification first, then the piston size for your EJ20 build. Both options use a Subaru 79mm induction-hardened forged crankshaft, RCM/Omega forged pistons and ACL Race bearings. The connecting rods and included sealing components differ as set out below. The price buys one selected component kit; professional engine assembly and machining are required.

Choose the kit specification

  • Budget forged – Manley rods: Subaru forged crankshaft, Manley H-beam rod set, Omega piston set and ACL Race main/big-end bearing sets. Case seals and sealer are not listed as included in this option.
  • Forged – Arrow rods: Subaru forged crankshaft, RCM/Arrow H-section rod set, Omega piston set, ACL Race main/big-end bearing sets, plus the case seals and sealer detailed below.

Only the eight manufacturer-offered combinations are selectable here. The billet-crank kit is a separate specification. The name 2.1 is RCM’s engine-build designation; piston diameter is distinct from displacement and compression ratio. No fixed compression ratio or piston bowl volume is specified for these kits; confirm the complete build with your engine builder.

Forged – Arrow rods: kit contents

  • Subaru 79mm induction-hardened forged crankshaft.
  • RCM/Arrow H-section connecting rod set.
  • RCM/Omega forged piston set with rings, gudgeon pins and circlips.
  • ACL Race main and big-end bearing sets in rear-thrust configuration.
  • Engine-case seal kit and 250g ThreeBond grey engine sealer.

Forged – Arrow rods: crankshaft and rod specification

The FHI Japan Subaru forged crankshaft has a 79mm stroke and is induction hardened for wear resistance. The RCM/Arrow H-section rods use low-sulphur, vacuum-degassed EN24 nickel-chrome alloy steel in V condition with the supplier-described pined surface finish. RCM describes ultrasonic and crack testing, balancing within 1g and its laser-engraved marking.

  • Four connecting rods per set.
  • Supplier dimensional figures: big-end diameter 55.008; gudgeon-pin diameter 23.000; between centres 130.450; big-end and small-end width 21.400.
  • Rod bolt size: 3/8 UNF.

Forged – Arrow rods: included case seals and sealer

  • Three Subaru small black case-half O-rings and one Subaru orange case O-ring.
  • One Subaru front crankshaft oil seal and one rear crankshaft oil seal.
  • Six Dowty block-bolt engine seals and three aluminium piston-pin-hole seal washers.
  • One 250g tube of ThreeBond grey engine sealer.

Budget forged – Manley rods: crankshaft and rod specification

The FHI Japan Subaru forged crankshaft has a 79mm stroke and is induction hardened for wear resistance. The Manley H-beam rods use 4340 forgings, with heat treatment, stress relief, shot peening and 100% magnaflux inspection.

  • RCM lists weight-matched sets with a 1.5g matching figure.
  • 3/8in ARP 2000 connecting-rod bolts.
  • Manley describes controlled final hone size, thread detail, bend and twist.

RCM/Omega pistons: both kit specifications

The pistons are forged from 2618A aerospace alloy and supplied as a set of four with piston rings, gudgeon pins and circlips. RCM describes the strength benefits of forged grain structure and Omega’s bespoke heat treatment.

RCM reports CNC manufacture and inspection at a controlled 20.5°C; sunlight can cause up to 10 microns of expansion. The skirts have an elliptical cross-section and barrelled length profile for operation at working temperature, with machining repeatability to 5 microns.

Pistons are individually weighed and batched within 0.5g, giving no more than 2.0g deviation across a four-piston set. RCM notes that some sets can be matched within 0.1g. RCM cites its Gobstopper I and II development cars, running over 700bhp with an additional nitrous option and a 10,000rpm limit, as its test experience.

ACL Race bearing features

The kit includes one main-bearing set and one big-end-bearing set in rear-thrust configuration, with high-performance trimetal construction.

  • Reduced-thickness, high-strength overlay for fatigue resistance.
  • Hardened steel backs on rod bearings and increased crush for bearing retention.
  • No flash plating on bearing backs, helping heat transfer and grip in the housing.
  • Increased eccentricity to accommodate bore distortion at high rpm and support oil-film formation.
  • Three-quarter-grooved main bearings for load-bearing area and oil supply to the connecting rods.
  • Consistent wall tolerances for clearance control, with enlarged inner-edge chamfers where required for crankshaft fillet clearance.

Fitment and machining

RCM lists EJ20 open-deck, semi-closed-deck and closed-deck blocks. Early closed-deck blocks require a rear-thrust conversion. Cylinder rebore and honing are required for piston installation; confirm the selected piston option and final clearances before machining.

Piston-size options

Available selections: 92.00mm standard, 92.25mm, 92.50mm or 93.00mm oversize. Each piston size is available with either listed rod specification; the price is for one selected stroker component kit. Check the exact manufacturer SKU shown after selecting both options. Photographs show the supplier’s kit and component views; choose the specification for the supplied contents.

Additional information

Weight N/A
Dimensions N/A
Kit specification

Budget forged – Manley rods, Forged – Arrow rods

Stroker Kit Piston Size

92.00mm STD Size Piston Set, 92.25mm Oversize Piston Set, 92.50mm Oversize Piston Set, 93.00mm Oversize Piston Set

Brand

Roger Clark Motorsport

Browse Roger Clark Motorsport (RCM) Subaru engine, cooling, performance and workshop products at MB Developments. Check the exact engine, model application and selected kit contents.

You may also like…

  • Plastigauge Bearing Clearance Gauges – 10 Strands, RCM744 – supplier view 1

    Plastigauge Bearing Clearance Gauges – 10 Strands, RCM744

    £11.99
    Add to basket
CONTACT
💬 WhatsApp ☎ Call Us ✉ Email Us