Price range: £1,220.00 through £1,465.00
Haltech HT-230801 Nexus plug-in ECU for the exact cable-throttle Holden Commodore VN–VS applications listed, with selectable ECU-only, Bosch LSU 4.9 and IO-harness packages. Direct Haltech UK showed five base ECUs available when checked. Professional installation and NSP calibration required.
Haltech sale: dispatch times may be longer than usual. Please contact us before ordering to confirm current availability and estimated delivery.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
Haltech Nexus Plug-in ECU – GM Delco Holden Commodore VN–VS
The HT-230801 Nexus GM Delco ECU is a vehicle-specific plug-in package for the exact cable-throttle Holden Commodore applications listed below. Select the ECU alone or one of Haltech’s current supported accessory combinations. Each package states every included Haltech part number; MBD-prefixed bundle references are internal identifiers only.
Exact supported applications
- Holden Commodore VN–VP V6 with DFI module, automatic or manual transmission
- Holden Commodore VN–VP V8 with distributor, automatic or manual transmission
- Holden Commodore VR–VS V8 with distributor, manual transmission only; excludes VS Series III
- Holden Commodore VR V6 with DFI module, manual transmission only
Cable-throttle applications only. Confirm the exact engine, ignition arrangement, transmission and ECU connector before ordering. The supplied bracket is intended for Australian domestic-market vehicles.
Base ECU package contents – HT-230801
- Nexus GM Delco ECU
- 2.5m air-temperature and wideband expansion harness with spare pins
- 1/8 NPT air-temperature sensor and aluminium weld-on boss
- Mounting bracket and hardware
- 2.5m of 3mm vacuum hose and aluminium T-piece
- Haltech USB-C cable and quick-start guide
Selectable packages
- ECU only: HT-230801 base package
- ECU + Bosch LSU 4.9: HT-230801 plus HT-010746 wideband hardware pack
- ECU + IO expansion: HT-230801 plus HT-189002 2.5m IO expansion harness
- ECU + Bosch LSU 4.9 + IO: HT-230801 plus HT-010746 and HT-189002
Installation and calibration
The original MAF and narrowband oxygen sensor are not supported. Use the ECU’s onboard 4-bar MAP sensor with the supplied hose and T-piece. The V6 DFI and V8 distributor applications have different ignition requirements, so follow Haltech’s official quick-start and knowledge-base instructions for the exact vehicle.
Professional installation, configuration and calibration in Haltech NSP are required. Any base setup is a starting point and is not a final tune.
UK availability
Direct Haltech UK showed five HT-230801 ECUs available when checked on 17 November 2026. Accessory availability is checked separately and backorders are disabled. Haltech sale dispatch times may be longer than usual; please contact us before ordering to confirm current availability and estimated delivery.
Additional information
| Package | ECU only – HT-230801, ECU + Bosch LSU 4.9 – HT-230801 + HT-010746, ECU + IO expansion – HT-230801 + HT-189002, ECU + Bosch LSU 4.9 + IO – HT-230801 + HT-010746 + HT-189002 |
|---|---|
| Exact applications | VN–VP V6 DFI auto/manual; VN–VP V8 distributor auto/manual; VR–VS V8 distributor manual only excluding VS Series III; VR V6 DFI manual only |
| Base manufacturer part number | HT-230801 |
| Throttle | Cable throttle only |
| Setup | Professional installation and Haltech NSP calibration required |













