£333.00
Genuine Haltech HT-196002 Nexus Ti6L kit for compatible GM 6L80/6L90 automatic transmissions and Haltech Nexus ECUs/VCUs. Includes the Ti6L, HT-187007 terminated harness, mounting hardware, opposing connectors and guide.
Early-access product: confirm your TCM OS before purchase. Some OS versions may require third-party binary extraction before Haltech can add support.
Haltech promotion period: dispatch may take around 90 business days. Exact UK dispatch is unconfirmed; contact us first if timing is critical. The generic 1–3 working day note shown elsewhere on this page does not apply.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
Haltech Nexus Ti6L transmission control
The Haltech Nexus Ti6L kit lets a compatible Haltech Nexus ECU or VCU integrate with and control a supported GM 6L-series automatic transmission through its factory transmission control module. It is plug and play with a Nexus Rebel LS ECU and terminated harness through the transmission breakout connector. It does not support Haltech Elite, Platinum or legacy ECUs.
Exact application
- GM 6L80 and 6L90 automatic transmissions running a compatible TCM operating-system version.
- Compatible Haltech Nexus ECUs and VCUs, including Nexus Rebel LS.
- Universal Nexus installations need the transmission breakout connector wired to the Haltech CAN system by a competent installer.
Kit contents
- HT-196002 Nexus Ti6L transmission interface.
- HT-187007 Nexus Series 6Lx0 fully terminated transmission harness.
- Mounting hardware kit.
- Opposing connectors and pins.
- Quick-start guide.
Key specifications
- 34-pin AMP Superseal Keyway Type 2 connector.
- CAN 1 for Haltech protocol and CAN 2 for the GM 6L TCM protocol.
- 8–22V operating voltage, IP66 enclosure and 105°C / 221°F maximum ambient rating.
- Setup through Haltech NSP; Rebel LS users can use the Haltech setup wizard.
Early-access OS compatibility
Check the transmission TCM operating system before ordering. Haltech states that some OS versions may not yet be supported. If your OS is unsupported, a third-party tool is required to extract its binary before Haltech can add support. Have access to a suitable extraction tool before purchase. TCM reflashing requires at least NSP 1.46.3, Nexus ECU firmware 1.34.0 and Ti6L firmware 1.11.0. Reflashing and installation should be handled by an experienced professional with stable vehicle and laptop power.
Read Haltech’s Ti6L installation, OS-compatibility and reflashing guide.
Price and delivery
Direct Haltech UK consumer price observed at £335 including VAT; MBD price is £333 and no extra VAT is added at purchase.
Haltech promotion period: manufacturer terms warn dispatch may take around 90 business days. Exact UK dispatch for this item is unconfirmed; please allow for this potential delay before ordering. Contact us first if your delivery date is critical. UK warehouse stock does not confirm normal dispatch during the promotion. Haltech promotion terms.








