£972.00

Haltech Nexus T2 universal wire-in ECU for up to six cylinders or three rotors. HT-211000 includes the ECU, USB-C cable, dust cap, mounting hardware, quick-start guide and universal wiring diagram. Wiring, sensors, installation and tuning are separate.

Haltech promotion period: dispatch may take around 90 business days. Exact UK dispatch is unconfirmed; contact us before ordering if timing is critical.

Non Stock Item – Ordered In
Typical lead time: 1–3 working days, subject to supplier stock.

Description

Haltech Nexus T2 ECU

The Nexus T2 is Haltech’s compact, sealed universal ECU for custom-wired street-performance and basic EFI conversion projects. It supports naturally aspirated or forced-induction engines with up to six cylinders or three rotors. This is a universal wire-in ECU and is not a vehicle-specific plug-and-play or pre-tuned unit.

Supplied contents

  • Haltech Nexus T2 ECU, manufacturer part number HT-211000.
  • USB-C cable and USB-C dust cap.
  • Mounting bolt set and Haltech fabric keytag.
  • Quick-start guide and universal wiring diagram.

Key functions

  • Up to six peak-and-hold injector channels and six ignition outputs.
  • Five analogue voltage inputs, five digital pulsed outputs and two synchronised engine-position inputs.
  • Internal 4-bar MAP sensor, onboard logging, four-channel oscilloscope, USB-C and Wi-Fi.
  • Single CAN network for compatible Haltech displays and expansion devices.
  • Supports variable cam control for up to two cams; drive-by-wire throttle is not supported on this model.

Wiring and wideband choices

Haltech lists compatible add-ons for this exact ECU: HT-030009 plug and pin set, HT-181200 basic universal wire-in harness, HT-181201 premium universal wire-in harness, HT-159976 WB1 Bosch CAN wideband kit and HT-159979 WB1 NTK CAN wideband kit. These are separate components and are not included in the HT-211000 price. Ask us to confirm the required wiring and sensor package before ordering; no unverified ECU-and-harness bundle SKU is implied.

Installation and setup

Professional wiring, configuration and calibration are required. The official guide requires correct fused, relay-switched power and direct battery-negative grounding. Confirm trigger type, ignition hardware, sensor compatibility, relays and all vehicle requirements with your installer before purchase. Installation, setup and custom dyno mapping are available by enquiry; labour and extra components are separate.

Read Haltech’s Nexus T1/T2 wiring and installation reference.

Delivery

Haltech promotion period: manufacturer terms warn dispatch may take around 90 business days. Exact UK dispatch for this item is unconfirmed; please allow for this potential delay before ordering. Contact us first if your delivery date is critical. The UK stock figure does not confirm normal dispatch during the promotion. No extra VAT is added at purchase.

Additional information

Manufacturer part number

HT-211000

Application

Universal 1–6 cylinder or 3 rotor

Wiring format

Universal wire-in; connector/harness sold separately

Compatible Haltech wiring choices

HT-030009 plug/pin set; HT-181200 basic harness; HT-181201 premium harness

Compatible Haltech wideband choices

HT-159976 WB1 Bosch; HT-159979 WB1 NTK

Brand

Haltech

Explore Haltech engine-management products, including ECUs, vehicle control units and the listed wiring, sensors and accessories at MB Developments. Check ECU compatibility and the wiring or adaptor requirements for the installation.
CONTACT
💬 WhatsApp ☎ Call Us ✉ Email Us