£776.80

RCM/Omega low-compression EJ25 piston set with rings, gudgeon pins and circlips. Choose 99.50, 99.75 or 100.00 mm finished bore for a 79 mm crankshaft build. All three supplier options are currently out of stock; confirm the complete engine specification and machining before ordering.

SKU: N/A Category:

Description

RCM/Omega low-compression forged pistons for EJ25 builds

Choose the finished bore required for the supplier-defined low-compression EJ25 family: 99.50 mm standard bore, 99.75 mm oversize or 100.00 mm oversize. Each option is a set of four pistons for a 79 mm crankshaft EJ25 build. This family is separate from RCM’s standard-compression, high-compression and low-expansion piston ranges.

Kit contents and manufacture

  • Four forged pistons with piston rings, gudgeon pins and circlips
  • 2618A aerospace-alloy construction, manufactured by Omega for RCM
  • CNC machined under controlled 20.5°C conditions
  • Individually weighed and batched to within 0.5 grams
  • Exact manufacturer part number, stock and finished bore follow the selected option

Engine build and compression

RCM specifies these pistons for a 79 mm crankshaft EJ25 block. In the supplier’s reference configuration they sit 1.30 mm down the bore and retain the original EJ25 STI piston bowl volume and shape with a lower deck height. RCM does not publish a single compression ratio for every build because the actual result depends on the block, cylinder heads, head gasket and other components used.

Low compression describes this piston design; it is not engine displacement, bore diameter or a promised assembled compression ratio. Your engine builder must calculate the complete build and confirm the piston-to-head, valve and bore clearances before machining or assembly.

Choosing the correct bore and fitting

RCM identifies the family for WRX and STI 2006–2013 (V9+) EJ25 applications where the complete engine specification matches. Ask your engine builder to measure the block and specify the finished bore before ordering. Oversize pistons require the block to be machined to the correct finished bore; do not choose an oversize option without measurement.

Follow the RCM piston installation instructions for the applicable piston clearance and ring-gap procedures. Supplier family photographs show the exact low-compression piston family; the selected SKU and finished bore identify the set supplied.

Availability

All three bore options are currently out of stock with the supplier and cannot be backordered. Select a bore to view the exact manufacturer part number and current availability.

Additional information

Weight 12 kg
Dimensions 30 × 30 × 15 cm
Engine build

EJ25 low compression – 79 mm crankshaft stroke

Finished bore

99.50 mm, 99.75 mm, 100.00 mm

Piston position in supplier reference build

1.30 mm down the bore

Quantity

Four pistons with rings, gudgeon pins and circlips

Brand

Roger Clark Motorsport

Browse Roger Clark Motorsport (RCM) Subaru engine, cooling, performance and workshop products at MB Developments. Check the exact engine, model application and selected kit contents.
CONTACT
💬 WhatsApp ☎ Call Us ✉ Email Us