Original price was: £39.60.£35.64Current price is: £35.64.
Genuine Link four-core CAN accessory wiring cable, 10m length, with white, green, red and black conductors inside a PVC jacket. Raw cable only. Supplier currently out of stock; backorders are disabled.
Out of stock
Description
Link four-core CAN accessory wiring
The Link 10m Four-Core CAN Wiring Cable provides four conductors within one PVC outer jacket for custom CAN accessory installations. Manufacturer part number 101-0312 is supplied as 10m of cable, ready for a professional installer to cut, route and terminate for the particular equipment.
Cable specification
- Four internal wires: white, green, red and black.
- FLRRY 0.5mm² / 20 AWG internal conductors.
- PVC outer jacket, 6.1mm outside diameter.
- 10m supplied cable length.
Installation requirements
This is raw wiring cable, not a pre-terminated Link CAN connection lead or plug-and-play harness. Confirm the CAN accessory’s connector pinout, power supply, current demand, grounding and termination requirements in its manual. Wire colours do not replace an exact pinout check.
Select suitable protection and conductor sizing for the circuit. Fit the required connectors and terminals, and follow Link’s CAN wiring guidance and the instructions for each connected device. Professional wiring, configuration and testing are required.
Contents and availability
One 10m length of four-core cable is included. ECU, CAN devices, connectors, terminals, fuses and termination resistors are separate. The supplier currently shows no stock, so this listing is out of stock with no backorders. Contact MB Developments about custom CAN wiring and installation by enquiry.





