Price range: £30.24 through £43.20
Select the exact Link CAN connection for your ECU: older 5-pin Plug-In, newer 4-pin powered Plug-In, Wire-In header, Wire-In round 6-pin, Plug-In PCB header, or G5 Voodoo 4-pin WEIPU CAN. Check the ECU connector and revision before ordering; the options are not interchangeable.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
Link ECU CAN connection cables
Choose the Link CAN connection that matches the connector and CAN port on your ECU. These genuine Link parts are not interchangeable: check the ECU model, hardware revision and connector on the ECU before ordering.
Available connections
- CANJST – Plug-In ECU 5-pin (101-0197): for G4+/G4X Plug-In ECUs with the older 5-pin JST CAN connector. It terminates in a DTM4 male connector and has 12V and ground flying leads.
- CANJST4 – Plug-In ECU 4-pin powered (101-0198): for newer G4X Plug-In ECUs with the 4-pin powered CAN connector. It provides CAN and a protected 12V supply for compatible low-power CAN accessories with total continuous current below 3A.
- CANSS – Wire-In ECU header CAN (101-0210): for Wire-In ECUs with CAN available through the ECU header, including Atom/Monsoon CAN1 and Storm/Xtreme/Fury CAN2 applications listed by Link.
- CANLTW – Wire-In ECU 6-pin CAN (101-0211): for the round 6-pin CAN port on compatible Xtreme, Fury, Force, Thunder and G5 Voodoo Pro ECUs.
- CANPCB – Plug-In ECU PCB header (101-0022): plugs into the PCB header of compatible G4+/G4X Plug-In ECUs to add CAN/serial communications. Link specifies the separate CANF field-installable plug for the external connection; CANF is not included.
- G5 CAN – Voodoo ECU 4-pin (101-5104): a 300mm cable for the 4-pin WEIPU CAN connector on compatible G5 Voodoo ECUs. It provides CAN High, CAN Low, 12V and ground and terminates in a DTM4 male connector; power is supplied by the ECU.
Wiring and installation
Link’s CAN cable manual states that CANJST, CANSS and CANLTW need their red and black wires connected to an ignition-switched supply fused at 5A. CANJST4 and the G5 CAN cable take their protected 12V supply from the ECU and do not need that separate power wiring. Follow the Link manual and have the wiring completed by a competent installer.
Important buying information
Confirm the physical connector on your ECU rather than choosing by ECU family name alone. CANJST4 is required for the newer 4-pin Plug-In ECUs listed by Link; the older CANJST does not fit those units. The G5 CAN cable uses a different 4-pin WEIPU connector and is for compatible G5 Voodoo ECUs. The field-installable CANF plug is a separate product and is not included with CANPCB.
Additional information
| Connection type | CANJST – Plug-In ECU 5-pin (101-0197), CANJST4 – Plug-In ECU 4-pin powered (101-0198), CANSS – Wire-In ECU header CAN (101-0210), CANLTW – Wire-In ECU 6-pin CAN (101-0211), CANPCB – Plug-In ECU PCB header (101-0022), G5 CAN – Voodoo ECU 4-pin (101-5104) |
|---|










