Sale!

Price range: £3,130.92 through £3,871.80

Universal Link G5 Voodoo Pro V2 wire-in ECU with dual onboard Lambda, flexible I/O and advanced communications. Choose ECU-only, one/two DI Driver-4 modules or the official 2.5m loom-and-sensor bundle. Professional wiring, unlocking, setup and tuning required.

Non Stock Item – Ordered In
Typical lead time: 1–3 working days, subject to supplier stock.

Description

Link G5 Voodoo Pro V2 universal wire-in ECU

Voodoo Pro V2 provides flexible engine management for demanding custom installations, with dual onboard Lambda control and extensive configurable I/O. Choose the ECU or an official Link bundle below. It is a universal wire-in ECU requiring custom wiring, setup and tuning; it is not a vehicle-specific plug-in replacement.

Key features

  • Up to 12-cylinder sequential or 8-cylinder staged sequential operation, subject to the fuel-pump arrangement and available I/O.
  • 12 dedicated injection drives, eight dedicated ignition drives and four shared injection/ignition/auxiliary drives. Shared drives cannot perform both roles simultaneously.
  • Dual onboard Bosch LSU 4.9 wideband Lambda control; sensors are included only in the loom-and-sensor bundle.
  • Wi-Fi, GPS, Ethernet, USB-C, dual CAN and 1GB onboard logging.
  • Eight ADIO pins and dual H-bridges for supported electronic-throttle or low-power electronic-wastegate configurations.

Choose your official package

  • 153-5000 – ECU only: Pro V2 ECU, USB-C cable, Wi-Fi and 4m GPS antennas, dust covers, mounting screws and documentation. No A/B looms, E connector kit, engine sensors or DI driver.
  • 153-9000B – ECU + one DI Driver-4: the ECU package plus one DI Driver-4 module.
  • 153-9200B – ECU + two DI Driver-4 modules: the ECU package plus two modules. Each driver includes its D connector/pin kit and USB-C cable.
  • 153-9300B – loom-and-sensor bundle: the ECU package, 2.5m A and B looms, E connector/pin kit, two Bosch LSU 4.9 sensors with plug/pin kits, a 4-bar absolute MAP sensor and 1/8-inch NPT IAT sensor with connector kits. No DI driver.

Plan the wiring and injection system

Each DI Driver-4 controls up to four compatible solenoid direct injectors and one high-pressure pump solenoid. One or two included drivers do not provide a complete 12-cylinder direct-injection system. Confirm injector compatibility, firing order, pump requirements, wiring and I/O allocation with your installer. The DI bundles do not include the 2.5m A/B looms or sensor pack.

Use the current Pro V2 manual and pinouts for the actual ECU revision. Its A/B/E headers and V2 CAN connector must be checked; do not assume a Pro V1 or existing G4X loom is interchangeable without changes.

Installation and support

Professional wiring, supplier unlocking, PCLink configuration and calibration are required before use. Mount away from excessive heat and moisture. Installation, setup, custom dyno mapping, additional sensors and custom looms are available by enquiry. Installation and tuning must comply with applicable laws and retain required vehicle safety and emissions protections.

Pro V2 manuals and installer I/O table

Additional information

Package

ECU only, ECU + one DI Driver-4, ECU + two DI Driver-4 modules, ECU + 2.5 m A/B looms + sensors

Brand

LINK ECU

Explore Link ECU plug-in and wire-in ECUs, wiring, sensors and engine-management accessories at MB Developments. Check the exact ECU, vehicle wiring and required installation components.
CONTACT
💬 WhatsApp ☎ Call Us ✉ Email Us