Price range: £84.00 through £120.00

Genuine Link injector ballast resistor pack for low-impedance injector installations. Choose BAL single 1Ω 50W, BAL2 twin 1Ω 50W, BAL4 quad 4.7Ω 25W or BAL6 six 4.7Ω 25W. Confirm injector/ECU compatibility before purchase and mount the supplied heatsink securely to the chassis.

Non Stock Item – Ordered In
Typical lead time: 1–3 working days, subject to supplier stock.
SKU: N/A Category: Tags: , ,

Description

Link injector ballast resistor packs

These genuine Link ballast resistor packs are for low-impedance fuel-injector installations that require external ballast. Choose the exact resistor specification and quantity required by the injectors and ECU wiring design.

Choose the correct pack

  • BAL 101-0011: one 1 Ohm 50W resistor on a heatsink.
  • BAL2 101-0012: two 1 Ohm 50W resistors on a heatsink.
  • BAL4 101-0013: four 4.7 Ohm 25W resistors on a heatsink.
  • BAL6 101-0014: six 4.7 Ohm 25W resistors on a heatsink.

Compatibility and installation

Injector impedance and the required ballast value must be confirmed before purchase. Link specifies the 4.7 Ohm BAL4 and BAL6 packs for injectors between 2 and 6 Ohms and advises contacting Link when injectors are below 2 Ohms. The 1 Ohm BAL and BAL2 choices are different products and must not be substituted without confirming the injector and ECU requirements.

Ballast resistors become hot at high injector duty cycles. Keep them mounted on the supplied heatsink and bolt the heatsink securely to the chassis in a suitable ventilated location away from heat-sensitive parts. Professional wiring and ECU configuration are recommended.

Additional information

Resistor pack

Single 1Ω 50W – BAL, Twin 1Ω 50W – BAL2, Quad 4.7Ω 25W – BAL4, Six 4.7Ω 25W – BAL6

Brand

LINK ECU

Explore Link ECU plug-in and wire-in ECUs, wiring, sensors and engine-management accessories at MB Developments. Check the exact ECU, vehicle wiring and required installation components.
CONTACT
💬 WhatsApp ☎ Call Us ✉ Email Us