£837.99
Four RCM/Omega forged pistons with rings, gudgeon pins and circlips for an EJ22-based 2.35 stroker build using a 79 mm crankshaft. Choose 97.25, 97.50 or 98.00 mm finished bore. Confirm the block machining and complete build; compression depends on the components used.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
RCM/Omega forged pistons for an EJ22-based 2.35 stroker build
Choose the finished bore specified by your engine builder: 97.25 mm, 97.50 mm or 98.00 mm. These are three verified options in the same RCM/Omega EJ22 stroker piston family, designed for a 79 mm crankshaft. They are separate from standard-stroke EJ22/22B pistons, EJ20 stroker pistons and the EJ25 high-compression family.
Contents and manufacture
- Four Omega forged 2618A aluminium pistons
- Piston rings, gudgeon pins and circlips
- CNC machining and quality-control measurement at a controlled 20.5°C
- Individually weighed and batched to within 0.5 g, with a stated maximum set-of-four deviation of 2.0 g
- Elliptical, barrel-shaped skirts designed for working temperature; RCM states machining repeatability of 5 microns
Engine build and bore selection
RCM identifies this range for its EJ22-based 2.35-litre stroker build using a 79 mm crankshaft. The 2.35-litre description is the manufacturer’s build designation; the bore choices are piston diameters, not separate promised final engine capacities. No exact swept volume is inferred for an oversize option.
The block must be measured and prepared for the selected finished bore. Confirm the complete crankshaft, connecting-rod, cylinder-head and head-gasket specification with your engine builder before ordering. Engine name alone does not establish piston interchangeability.
Compression and installation
RCM states that compression depends on cylinder-head type, head-gasket thickness, connecting-rod length and crankshaft configuration. No fixed compression ratio or piston bowl-volume figure is supplied for these choices. Contact us to discuss the intended build; professional machining, assembly and the piston maker’s specified clearance and ring-gap checks are required.
Each selected bore retains its own manufacturer part number, price and stock. The price is for one four-piston set with the rings, pins and circlips described above. Genuine supplier photographs illustrate the family; the selected part number and bore identify the set supplied.
RCM motorsport use
RCM reports Omega piston use in its Gobstopper projects, including engines developing over 900 bhp with a 10,000 rpm rev limit. This describes RCM’s motorsport use, not a power rating or promised output for the piston set or your build.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Engine build | EJ22-based 2.35 stroker – 79 mm crankshaft stroke |
| Finished bore | 97.25 mm, 97.50 mm, 98.00 mm |
| Quantity | Four pistons with rings, gudgeon pins and circlips |











