Original price was: £42.00.£37.80Current price is: £37.80.
Genuine 2.5m Link XS expansion loom for compatible G4, G4+ and G4X plug-in ECUs. Connects to the ECU’s expansion socket to access the inputs and outputs available on that exact model. Sensors and ECU are separate.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
Link XS plug-in ECU expansion loom
The genuine Link XS Expansion Loom connects to the expansion socket on a compatible Link plug-in ECU, giving your installer access to additional inputs and outputs. Manufacturer part number 101-0106, also known as XSL, is supplied as a 2.5m loom with flying leads for custom wiring.
Useful applications
- Connecting supported oil- or fuel-pressure sensors.
- Adding an inlet air-temperature sensor where appropriate.
- Wiring a compatible wideband lambda signal.
- Connecting a boost-adjustment knob or switch.
- Adding a map-selection switch when the ECU is configured for it.
Check your ECU before ordering
Link identifies this loom for compatible G4, G4+ and G4X plug-in ECUs. The connector and available channels depend on the exact ECU model and revision. Check the expansion connector and pin assignments in its installation manual; the loom does not add new electronic input/output channels beyond those the ECU already supports.
This is not an A/B main connector loom for a wire-in ECU, a CAN lead, a vehicle-specific engine harness or a universal promise of compatibility with every G5 ECU. A wideband connection still needs the correct sensor/controller arrangement and ECU configuration.
Contents and installation
One 2.5m XS expansion loom is included. ECU, sensors, switches and any additional controllers are sold separately. Professional wiring and setup are required. Use the exact Link installation manual and PCLink documentation; contact Link ECU for the correct manual if needed. MB Developments can help with custom wiring, installation, setup and mapping by enquiry.





