Price range: £1,950.00 through £2,290.00
Haltech Nexus R3 universal VCU for engines with up to eight cylinders or four rotors. Choose VCU only, VCU with plug/pin set, or VCU with 2.5m universal wire-in harness. Professional wiring, configuration and tuning are required.
Haltech promotion: manufacturer terms warn dispatch may take around 90 business days. Exact UK dispatch is unconfirmed; contact us first if timing is critical. The generic 1–3 working day note shown elsewhere on this page does not apply to this product.
Haltech promotion: manufacturer terms warn dispatch may take around 90 business days. Exact UK dispatch for this item is unconfirmed; please allow for this potential delay before ordering. Contact us first if your delivery date is critical.
Description
Haltech Nexus R3 VCU
The Nexus R3 combines engine management, power distribution, onboard data logging and wideband control in one universal vehicle control unit. It suits engines with up to eight cylinders or four rotors where advanced race features and power-management control are required. Select the genuine Haltech package that matches your wiring plan.
Package contents
- HT-193000 — VCU only: Nexus R3 VCU, red and black SurLok connectors, Wi-Fi antenna, mounting bolts, USB-C cable and USB-C dust cap. Engine wiring connectors and a universal harness are not included.
- HT-193100 — VCU + plug and pin set: Nexus R3 VCU with AMP 34-pin key 1 and key 2 connectors plus DTP-4 connectors and pins for a custom loom. A universal harness is not included.
- HT-193200 — VCU + 2.5m universal wire-in harness: Nexus R3 VCU base contents with the genuine 2.5m (8ft) universal wire-in harness. The VCU end is terminated; the engine end uses colour-coded, labelled flying leads.
Useful features
- Eight peak-and-hold injector drivers and eight low-current ignition outputs.
- Four 25A continuous push-pull PWM outputs and six additional low-side drive outputs.
- Six push-pull/H-bridge outputs for functions such as electronic throttle.
- Onboard 4-bar MAP sensor and one wideband controller supporting NTK and LSU 4.9 hardware.
- Two CAN networks with switchable termination and 128MB onboard logging for up to 300 channels at sample rates up to 1kHz.
Installation and setup
This is a universal wire-in VCU, not a vehicle-specific plug-and-play or pre-tuned product. Professional wiring, configuration and calibration are required. Confirm trigger type, ignition hardware, sensors, relays, power-distribution requirements and vehicle functions with your installer before ordering. Installation, setup and custom dyno mapping are available by enquiry; labour, sensors and other hardware are separate unless explicitly listed in the selected package.
View the official Haltech Nexus R3 product and resource page.
Offer and delivery
MBD offer ends at 12 noon GMT on 7 December 2026, or earlier if the supplier offer ends. This is our deliberately earlier cutoff, not Haltech’s official closing time. No extra VAT is added at purchase.
Haltech promotion: manufacturer terms warn dispatch may take around 90 business days. Exact UK dispatch for this item is unconfirmed; please allow for this potential delay before ordering. Contact us first if your delivery date is critical. UK warehouse stock does not confirm normal dispatch during the promotion. Haltech promotion terms.
Additional information
| Package | VCU only, VCU + plug and pin set, VCU + 2.5m universal wire-in harness |
|---|












