Sale!

Original price was: £1,554.00.Current price is: £1,398.60.

Link TFZJ100X ECU for compatible manual Toyota Land Cruiser FZJ100 1FZ-FE non-VVT-i models. Supports verified three- and four-plug looms with correct jumper setup. Installation and tuning required.

Non Stock Item – Ordered In
Typical lead time: 1–3 working days, subject to supplier stock.
SKU: 230-4000 Category:

Description

Link G4X FZJ100Link ECU

The TFZJ100X replaces the factory engine-management board in compatible Toyota Land Cruiser FZJ100 applications. Your tuner can configure fuelling, ignition and supported engine functions through PCLink while retaining the original ECU location, enclosure and factory loom.

Useful features

  • Programmable fuel and ignition maps.
  • Data logging for setup and fault investigation.
  • Two CAN buses for supported aftermarket equipment.
  • Expansion connections for additional sensors and functions.
  • PCLink software for configuration, logging and tuning.

Exact application and buying checks

Manufacturer SKU 230-4000: Toyota Land Cruiser FZJ100 with the six-cylinder 1FZ-FE non-VVT-i engine and manual transmission. Automatic transmissions are not supported. Check the actual ECU connector and vehicle wiring before ordering; this is not a general Land Cruiser ECU.

Both supported three-plug and four-plug factory looms use this same ECU. The installer must set the board jumpers for the original plug arrangement. On a supported four-plug loom, the plug without a matching ECU socket remains disconnected, as specified in Link’s manual.

Installation and sensors

Confirm a suitable MAP sensor and intake-air-temperature sensor, wiring and calibration. Electronic-throttle conversion requires modification, an external controller and additional wiring; it is not a ready-to-use throttle conversion kit.

Professional installation, setup and tuning are required. A supplied base map is a starting point for configuration, not a finished tune. Follow the exact TFZJ100X installation manual.

Included and support

TFZJ100X ECU board, anti-static strap, USB tuning cable, stickers, manual card and registration card. Additional sensors, expansion looms and throttle-conversion hardware are separate.

We offer installation, setup and custom dyno mapping by enquiry. Sensor packs and custom wiring looms are available separately. Link specifies off-road use; confirm suitability for your intended application.

Additional information

Brand

LINK ECU

Explore Link ECU plug-in and wire-in ECUs, wiring, sensors and engine-management accessories at MB Developments. Check the exact ECU, vehicle wiring and required installation components.
CONTACT
💬 WhatsApp ☎ Call Us ✉ Email Us