Original price was: £126.00.Current price is: £113.40.

Link 101-0054 KNSB non-resonant knock sensor, pre-wired with a 2.6 m loom and flying leads. For compatible Link and aftermarket ECU knock inputs. Supplier stock was zero at the latest check, so backorders are disabled.

Out of stock

Description

Link knock sensor with loom (KNSB)

The Link 101-0054 KNSB is a non-resonant piezoelectric knock sensor supplied pre-wired with a 2.6 m loom and flying leads. It monitors engine-block vibration and sends the signal to a compatible ECU so knock can be identified and the calibration can use suitable knock-control and engine-protection strategies.

What is included

  • Link KNSB non-resonant knock sensor
  • Pre-wired 2.6 m loom
  • Flying leads for connection to the engine-management system

Compatibility

Designed for Link ECUs with knock-detection capability. It can also suit other aftermarket ECUs with a compatible knock-sensor input and can be used with the Link KnockLink visual warning light where the installation and wiring are suitable.

Installation and setup

Install the sensor directly onto a suitable flat surface on the engine block. Link specifies a tightening torque of 20 ± 5 Nm; correct mounting and torque are critical for reliable knock detection. Wire the flying leads to the correct input and configure the sensor in the ECU software. One or more sensors may be required depending on the engine and application.

Before ordering

Confirm the ECU input, sensor quantity, mounting position and wiring requirements for the exact application. This is a universal motorsport sensor rather than a vehicle-specific replacement. Professional installation and ECU calibration are recommended. MB Developments can help with installation, setup and custom dyno calibration by enquiry.

Manufacturer part number: 101-0054

Additional information

Weight 1 kg
Dimensions 25 × 20 × 10 cm
Manufacturer part number

101-0054

Sensor type

Non-resonant piezoelectric knock sensor

Included loom

Pre-wired 2.6 m loom with flying leads

Mounting style

Donut-style engine-block knock sensor

Tightening torque

20 ± 5 Nm

ECU compatibility

Link ECUs with knock detection; suitable aftermarket ECU knock inputs

Brand

LINK ECU

Explore Link ECU plug-in and wire-in ECUs, wiring, sensors and engine-management accessories at MB Developments. Check the exact ECU, vehicle wiring and required installation components.

You may also like…

  • Link 5 Bar map Sensor (MAP5)

    £209.99
    Read more
  • Sale!
    Link KnockLink complete kit with knock sensor and loom, 114-2000

    Link KnockLink G4 Visual Knock Warning – Interface or Complete Kit

    Price range: £214.92 through £276.48
    Select options
CONTACT
💬 WhatsApp ☎ Call Us ✉ Email Us