Original price was: £56.40.£50.76Current price is: £50.76.
Compact genuine Link 1/8 NPT NTC sensor for coolant, oil or fuel temperature. Includes a Deutsch two-pin connector kit. Use the correct Link calibration and verify wiring, sealing and fluid compatibility during installation.
Typical lead time: 1–3 working days, subject to supplier stock.
5 in stock
Description
Link NTC1-8 1/8 NPT temperature sensor
The Link NTC1-8 is a compact two-wire NTC temperature sensor for coolant, oil and fuel temperature measurement. Its 1/8 NPT thread suits many aftermarket installations, while the metal body and supplied Deutsch two-pin connector kit provide a practical, serviceable installation.
Key features
- 1/8 NPT threaded NTC thermistor
- Suitable for water, engine oil and fuel temperature measurement
- Two-wire connection: signal and sensor ground
- 5 V sensor circuit
- Approximately 55 × 15 × 20 mm and 5 g
What’s included
One Link NTC1-8 sensor and one Deutsch two-pin connector kit are supplied. Link weld-in mounting bosses 101-0046 and 101-0047 are available separately where a new sensor port is required.
Calibration and installation
Configure the ECU with the Link NTC1-8 & IAT1-8 or Delphi AC IAT calibration as appropriate. Verify the selected calibration, wiring and thread sealing method before first use. Installation and ECU setup should be carried out by a competent technician; do not use thread sealant in a way that contaminates the sensor or fluid system.
Additional information
| Weight | 0.005 kg |
|---|---|
| Dimensions | 5.5 × 1.5 × 2 cm |






