£837.99

Four RCM/Omega forged pistons with rings, gudgeon pins and circlips. Choose 99.50, 99.75 or 100.00 mm finished bore for the EJ25 high-compression family with a 79 mm crankshaft stroke and 11 cc piston bowl. Confirm the complete build and required machining before ordering.

Non Stock Item – Ordered In
Typical lead time: 1–3 working days, subject to supplier stock.

Description

RCM/Omega high-compression forged pistons for EJ25 builds

Choose the finished bore required for your EJ25 engine build: 99.50 mm standard bore, 99.75 mm oversize or 100.00 mm oversize. These three options are the same supplier-defined high-compression family for a 79 mm crankshaft stroke. They are not the separate EJ20, EJ22 stroker or other bowl-volume piston families.

Kit contents and manufacture

  • Four forged pistons, piston rings, gudgeon pins and circlips
  • 2618A aerospace-alloy construction, manufactured by Omega for RCM
  • CNC machined under controlled 20.5°C conditions
  • Individually weighed and batched to within 0.5 grams
  • Exact manufacturer part number, price, stock and photograph follow the selected bore

Engine build and compression

RCM specifies a 79 mm crankshaft and pistons sitting 0.30 mm below the deck. The higher deck-height design retains the original EJ25 STI piston bowl shape and 11 cc bowl volume. The 11 cc figure describes the piston bowl; it is not engine displacement, bore diameter or compression ratio.

The supplier quotes 9.481:1 compression with standard EJ25 STI cylinder heads and a 0.6 mm head gasket, or 10.156:1 with EJ20 STI single-AVCS cylinder heads and a 0.6 mm gasket. These are the supplier’s stated build examples, not a guaranteed ratio for every bore, head or assembled engine. Your engine builder must calculate the actual compression ratio, clearances and suitability for the components used. No additional displacement or compression figures are inferred for the oversize options.

Choosing the correct bore and fitting

RCM identifies this family for its V9+ WRX/STI EJ25 application; the actual block, crankshaft and cylinder-head combination must match the planned build. Ask your engine builder to measure the block and specify the finished bore before ordering. Professional machining, assembly and clearance checks are required; an oversize piston is not a substitute for measuring and preparing the block.

Follow the RCM piston installation instructions for the applicable piston clearance and ring-gap procedures. Supplier family photographs illustrate the piston design and contents; the selected part number and finished bore identify the set supplied.

Additional information

Weight 12 kg
Dimensions 30 × 30 × 15 cm
Engine build

EJ25 high compression – 79 mm crankshaft stroke

Finished bore

99.50 mm, 99.75 mm, 100.00 mm

Piston bowl volume

11 cc

Quantity

Four pistons with rings, gudgeon pins and circlips

Brand

Roger Clark Motorsport

Browse Roger Clark Motorsport (RCM) Subaru engine, cooling, performance and workshop products at MB Developments. Check the exact engine, model application and selected kit contents.

You may also like…

  • RCM MLS cylinder head gasket – supplier overview with packaging; thickness and quantity selected separately

    RCM EJ20 MLS Head Gasket – 2008+ JDM Only

    Price range: £77.19 through £156.38
    Select options
CONTACT
💬 WhatsApp ☎ Call Us ✉ Email Us