£69.99
RCM crankshaft pulley holding tool with a 50cm lever and 4 × 65mm or 4 × 77mm engagement pattern. Holds a matching pulley while its centre bolt is loosened or tightened. One tool; check the actual pulley interface.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
Hold the crankshaft pulley while working on its bolt
This RCM tool holds a compatible Subaru crankshaft pulley while the centre bolt is loosened or tightened during engine work. The 50cm lever provides a handle for controlling the pulley.
Tool specification
- Lever length: 50cm.
- Two pulley engagement patterns: 4 × 65mm and 4 × 77mm PCD.
- Two sets of engagement bolts with adjustable protrusion.
- Drilled handle end for hanging storage.
- Supplied as one pulley-holding tool.
Check the pulley interface
Choose this tool by the pulley engagement pattern (4 × 65mm or 4 × 77mm PCD), available clearance and engagement depth. These dimensions describe the pulley tool interface, not a wheel fitment. Check the actual pulley, including any replacement or aftermarket part, before use; a Subaru model name alone does not establish compatibility.
Use the vehicle workshop procedure for the centre bolt, including the specified torque and a suitable socket or torque wrench. The tool holds the pulley; it is not a torque wrench.
Photographs and the other tool
Photographs showing an engine or pulley illustrate use only. The engine, crankshaft pulley and other workshop equipment are not included.
The separately listed 70cm, 4 × 76mm tool has different dimensions. Select the correct tool rather than assuming the two are interchangeable.
Dispatch packing estimate
For dispatch, allow approximately 3 kg and a parcel measuring 85 × 25 × 15 cm. These are estimated packed figures, not the tool’s net weight or physical dimensions.
Additional information
| Weight | 3 kg |
|---|---|
| Dimensions | 85 × 25 × 15 cm |











