Original price was: £342.00.Current price is: £307.80.

Link RET external e-throttle controller, SKU 115-1000. For compatible Link ECUs without onboard e-throttle control or supported secondary-throttle applications. Requires three ECU auxiliary outputs, professional wiring and PCLink calibration. Supplier stock is currently unavailable, so backorders are disabled.

Out of stock

Description

Link RET remote electronic throttle controller

The Link RET adds electronic throttle (drive-by-wire) control to compatible Link ECUs that do not have an onboard e-throttle driver. It can also provide a second e-throttle channel on supported dual-throttle installations.

Key features

  • External electronic-throttle control module designed and manufactured by Link ECU.
  • Supports precise throttle control when installed and calibrated with a compatible Link ECU.
  • Suitable for single electronic-throttle installations and supported secondary-throttle applications.
  • Uses three ECU auxiliary outputs and a low-driven enable input.
  • Professional wiring, configuration and safety checks are required before use.

Compatibility

Link lists compatibility with G4+ Storm, Xtreme, Fury and Plug-in ECUs; G4X MonsoonX, StormX and Plug-inX ECUs; and secondary e-throttle use with G4X XtremeX and FuryX. Confirm the available auxiliary outputs, wiring and intended throttle arrangement before ordering.

Installation and setup

This is a universal control module, not a plug-and-play vehicle kit. Installation must be completed by a competent installer and configured in PCLink. The module requires three ECU auxiliary outputs, and its enable input must be driven low to activate it. Electronic-throttle safety, calibration and fail-safe settings must be checked before the engine is operated.

Sensor packs, electronic throttle bodies, pedal modules, wiring and custom installation services are available separately by enquiry where suitable.

Additional information

Weight 1 kg
Dimensions 20 × 20 × 10 cm
Compatibility

G4+ Storm, Xtreme, Fury and Plug-in; G4X MonsoonX, StormX and Plug-inX; secondary e-throttle with G4X XtremeX and FuryX

Control requirement

Three ECU auxiliary outputs; enable input driven low

Application

Universal external electronic-throttle controller

Installation

Professional wiring, PCLink configuration, calibration and safety checks required

Brand

LINK ECU

Explore Link ECU plug-in and wire-in ECUs, wiring, sensors and engine-management accessories at MB Developments. Check the exact ECU, vehicle wiring and required installation components.

You may also like…

  • Sale!
    Link Bosch 2 Way Plug Kit PKB2 101-0051 connector housing, terminals and rubber boot

    Link Bosch Plug Kits – 2, 3 or 7 Way

    Price range: £11.88 through £13.72
    Select options
  • Sale!
    Link KnockLink complete kit with knock sensor and loom, 114-2000

    Link KnockLink G4 Visual Knock Warning – Interface or Complete Kit

    Price range: £214.92 through £276.48
    Select options
  • Sale!
    Link Type K exhaust gas temperature probe with braided cable and compression fitting

    Link Exhaust Gas Temperature Probe (EGT) – Single or Multi-Pack

    Price range: £133.92 through £1,069.20
    Select options
  • Sale!
    Link 101-0052 Bosch EV14 injector, one of four supplied

    Link Bosch EV14 1000cc Injectors – Set of 4

    Original price was: £336.00.Current price is: £302.40.
    Add to basket
  • Sale!
    Link 101-0015 3BCS three-port boost control solenoid with three hose tail fittings

    Link 3-Port Boost Control Solenoid (3BCS) – 101-0015

    Original price was: £144.00.Current price is: £129.60.
    Add to basket
  • Sale!
    Link CAN Lambda controller with CAN and sensor connectors

    Link CAN Lambda Wideband Controller Kit – CANLAM 125-1000

    Original price was: £306.00.Current price is: £275.40.
    Add to basket
CONTACT
💬 WhatsApp ☎ Call Us ✉ Email Us