£258.00

Link ETB54 electronic throttle kit, exact SKU 101-0191. Includes a Bosch 54mm throttle body with dual position sensors and the mating connector kit. Requires a compatible Link ECU or external e-throttle module, a suitable pedal arrangement, professional wiring and calibration. Link UK stock was zero on 8 November 2026. The listing is out of stock and backorders are disabled; this does not mean the product is discontinued.

Out of stock

Description

Link 54mm Electronic Throttle Body Kit

The Link ETB54 kit combines a Bosch 54mm electronic throttle body with the mating connector kit needed to begin a professional drive-by-wire installation. Dual throttle-position sensors provide the redundancy expected from an electronic throttle system, while the integrated actuator gives a compatible ECU precise control of throttle opening.

Key features

  • 54mm bore for performance and motorsport applications
  • Dual throttle-position sensors for redundant position feedback
  • Integrated electronic throttle actuator
  • Mating electrical connector kit included
  • Exact Link part number 101-0191

Electrical specification and kit contents

  • Operating voltage: 6–16 V; maximum input voltage: 16 V
  • Maximum continuous current draw: 10 A
  • Throttle-position output: 0–5 V
  • AMP 6-pin connector
  • Includes the Bosch throttle body, mating connector and printed accessory instructions

Compatibility and setup

Use this kit with a Link ECU that has built-in electronic-throttle control, or with a suitable external electronic-throttle module such as Link part 115-1000. It also requires an appropriate electronic accelerator pedal or pedal-position sensors; Link pedal module 101-0188 is available separately.

This is a universal component rather than a vehicle-specific bolt-on kit. Confirm the mechanical flange, airflow requirement, pedal arrangement, wiring and ECU capability for the intended build before ordering. Professional installation, wiring, calibration, safety checks and ECU configuration are required. Refer to the PCLink help file for electronic-throttle setup guidance.

Stock and offer

Link UK stock was zero on 8 November 2026. The listing is out of stock and backorders are disabled; this does not mean the product is discontinued. This exact SKU is not in the verified Link 2026 Black Friday included list, so no campaign discount has been applied.

Additional information

Weight 1 kg
Dimensions 20 × 20 × 10 cm

Brand

LINK ECU

Explore Link ECU plug-in and wire-in ECUs, wiring, sensors and engine-management accessories at MB Developments. Check the exact ECU, vehicle wiring and required installation components.

You may also like…

  • Sale!
    Link 101-0015 3BCS three-port boost control solenoid with three hose tail fittings

    Link 3-Port Boost Control Solenoid (3BCS) – 101-0015

    Original price was: £144.00.Current price is: £129.60.
    Add to basket
  • Sale!
    Link Bosch 2 Way Plug Kit PKB2 101-0051 connector housing, terminals and rubber boot

    Link Bosch Plug Kits – 2, 3 or 7 Way

    Price range: £11.88 through £13.72
    Select options
  • Sale!
    Link Type K exhaust gas temperature probe with braided cable and compression fitting

    Link Exhaust Gas Temperature Probe (EGT) – Single or Multi-Pack

    Price range: £133.92 through £1,069.20
    Select options
  • Sale!
    Link CAS 101-0025 variable-reluctance crank angle sensor

    Link Crank Angle Sensor (CAS) – 101-0025

    Original price was: £157.20.Current price is: £141.48.
    Add to basket
  • Sale!
    Link 101-0052 Bosch EV14 injector, one of four supplied

    Link Bosch EV14 1000cc Injectors – Set of 4

    Original price was: £336.00.Current price is: £302.40.
    Add to basket
  • Sale!
    Link CAN Lambda controller with CAN and sensor connectors

    Link CAN Lambda Wideband Controller Kit – CANLAM 125-1000

    Original price was: £306.00.Current price is: £275.40.
    Add to basket
CONTACT
💬 WhatsApp ☎ Call Us ✉ Email Us