Original price was: £112.80.£101.52Current price is: £101.52.
Link 101-0053 KNS non-resonant donut-style knock sensor with an 8 mm mounting hole. Matching Bosch-style plug, terminals and boot included. For Link ECUs with knock-detection capability and suitable aftermarket ECU inputs. Correct flat-surface mounting, 20 ± 5 Nm tightening torque, wiring and ECU configuration are required.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
Link knock sensor (KNS)
The Link 101-0053 KNS is a non-resonant piezoelectric knock sensor for monitoring engine-block vibration. When it is installed and configured correctly, a compatible ECU can use the signal to identify abnormal combustion and support knock-control and engine-protection strategies.
Key features
- Donut-style universal knock sensor
- 8 mm centre mounting hole
- Compatible with Link ECUs that have knock-detection capability
- Can suit other aftermarket ECUs with a compatible knock-sensor input
- Compact sensor for custom engine-management installations
What’s included
One Facet 9.3010 knock sensor and the matching Bosch-style plug, terminals and boot (Link connector kit 101-0051). The pre-wired loom version is sold separately as KNSB, 101-0054.
Installation and setup
Mount the sensor directly to a suitable flat surface on the engine block. Link specifies a tightening torque of 20 ± 5 Nm; correct mounting and torque are important for reliable vibration transfer and knock detection. The sensor must be wired to the correct ECU input and configured in the ECU software. Some engines or applications may require more than one sensor.
Before ordering
Confirm the ECU input, sensor quantity, mounting position, 8 mm fixing and wiring requirements for the exact application before ordering. This is a universal motorsport sensor rather than a vehicle-specific replacement. Professional installation and ECU calibration are recommended. MB Developments can help with installation, setup and custom dyno calibration by enquiry.
Manufacturer part number: 101-0053
Additional information
| Weight | 1 kg |
|---|---|
| Dimensions | 20 × 20 × 10 cm |
| Manufacturer part number | 101-0053 |
| Sensor type | Non-resonant piezoelectric knock sensor |
| Mounting style | Donut style with 8 mm centre hole |
| Tightening torque | 20 ± 5 Nm |
| ECU compatibility | Link ECUs with knock detection; suitable aftermarket ECU knock inputs |
| ECU wiring & setup (PCLink) | |
| Included connector | Bosch-style plug, terminals and boot (Link 101-0051) |
You may also like…
-
Sale!

Link 8 Bar MAP Sensor EU (MAP8EU) 101-0298
Original price was: £228.00.£205.20Current price is: £205.20. Add to basket -
Sale!

Link 4 Bar MAP Sensor (MAP4) 101-0165
Original price was: £151.20.£136.08Current price is: £136.08. Add to basket -
Sale!

Link 2.5 Bar MAP Sensor (MAP2.5) 101-0163
Original price was: £138.00.£124.20Current price is: £124.20. Add to basket














