£573.86
Black billet TGV-delete/lower-runner kit for the specified Subaru intake arrangement. Match the heads and plenum; check calibration requirements.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
Process West Black Billet TGV Delete Kit
PWTD04B is the black Process West billet TGV-delete/lower-runner kit for the specified Subaru intake arrangement. It replaces the factory tumbler assemblies with a direct air passage; it is not a complete inlet manifold or induction conversion.
Features
- Billet aluminium tumbler assemblies with a port profile machined to suit ported cylinder heads
- O-ringed upper flange for the compatible plenum connection
- 11mm or 13mm diameter injectors accepted using the appropriate supplied Viton O-rings
- Factory-position fuel-rail mounting points; confirm the chosen rail and injector arrangement
Kit contents
- Two billet aluminium tumbler assemblies
- Four inlet-manifold-to-tumbler O-rings
- Two tumbler-to-cylinder-head gaskets
- One bolt kit to secure the manifold and tumbler castings to the cylinder heads
One complete kit is supplied. The plenum, fuel rails and injectors are not represented as included.
Fitment and installation
- Subaru Impreza WRX and STI, 2001–2007, subject to the correct heads, plenum and fuel-system arrangement
- STI 2008–2014 is listed in the current Process West product headline; confirm the exact installation specification before ordering
- The supplier additionally lists Forester XT and XTN, 2003–2007; confirm the complete intake arrangement for these applications
This is PWTD04B, not the separate PWTD02/PWTD02B short-runner GC8 kit. Process West describes 67mm and 79mm configurations in its range; confirm the required runner height and selected part number rather than choosing by colour or vehicle year alone. Other GC8 or later WRX applications are not inferred from a general compatibility table.
Specialist mechanical knowledge and tools are required. The supplier specifies ECU calibration changes for WRX and Forester applications. Confirm calibration requirements and suitability for the intended use before fitting.
Finish option
For the same selected TGV-kit family, view the raw silver PWTD04 kit. Check the part number, heads, runner height and plenum requirements for either finish.
Process West part number: PWTD04B.
Additional information
| Weight | 6 kg |
|---|---|
| Dimensions | 30 × 25 × 15 cm |
You may also like…
Related products
-

Process West Silver Reverse Inlet Manifold – Cable Throttle WRX/STI 2001–2005
£1,977.99 Add to basket -

RCM Reverse Manifold Conversion Wedge – DBW V7+
£229.99 Add to basket -

Process West Cold-Air Intake Kit – GD WRX/STI 2001–2007
£307.83 – £377.57Price range: £307.83 through £377.57 Select options -

Process West Raw Silver 67mm Short TGV Delete Kit – MY99–00
£536.55 Add to basket


