Original price was: £180.00.£162.00Current price is: £162.00.
Link 4-port MAC 45 boost control solenoid for high-boost applications. Includes four 1/8-inch BSPT hose fittings and supports Link ECUs with a correctly wired auxiliary output, MAP sensor and configured PCLink boost control. Professional installation and calibration are recommended.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
Link four-port boost control solenoid
The Link 4-Port Boost Control Solenoid is designed for high-boost turbocharged applications that need a wider control range than a conventional three-port valve. Its MAC 45-series design supports precise electronic control with internal or external wastegates and with single or multiple wastegate layouts.
Features
- Rated for boost pressure up to 120 psi.
- Supports approximately six to seven times base wastegate spring pressure where the complete system permits.
- Fast, consistent response with a short-stroke, high-flow balanced poppet.
- Suitable for all Link ECUs with a correctly configured auxiliary output.
- Compatible with single or multiple wastegates.
What is included
- One Link 4-port boost control solenoid.
- Four 1/8-inch BSPT nickel hose fittings.
- Accessory instructions.
Installation and setup
The installation requires a spare ECU auxiliary output switched to ground, an ignition-switched 12 V supply and a MAP sensor. Open-loop or closed-loop boost control must be configured in PCLink. Link recommends starting at a 25 Hz PWM frequency. Professional installation, hose routing checks, ECU setup and dyno calibration are strongly recommended before increasing boost.
Select this four-port version for high-boost applications that need its wider control range. The separate Link 3-port solenoid is generally the more suitable choice where that extra range is not required.
Additional information
| Weight | 0.135 kg |
|---|---|
| Dimensions | 3 × 4.5 × 2.5 cm |
| Manufacturer part number | 101-0016 |
| Solenoid type | MAC 45 series, 4 port |
| Maximum pressure | 120 psi |
| Port size | 1/8-inch BSPPL |
| Compatibility | All Link ECUs with correctly configured auxiliary output, power supply and MAP sensor |
| Included fittings | Four 1/8-inch BSPT nickel hose fittings |








