Price range: £84.00 through £120.00
Genuine Link injector ballast resistor pack for low-impedance injector installations. Choose BAL single 1Ω 50W, BAL2 twin 1Ω 50W, BAL4 quad 4.7Ω 25W or BAL6 six 4.7Ω 25W. Confirm injector/ECU compatibility before purchase and mount the supplied heatsink securely to the chassis.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
Link injector ballast resistor packs
These genuine Link ballast resistor packs are for low-impedance fuel-injector installations that require external ballast. Choose the exact resistor specification and quantity required by the injectors and ECU wiring design.
Choose the correct pack
- BAL 101-0011: one 1 Ohm 50W resistor on a heatsink.
- BAL2 101-0012: two 1 Ohm 50W resistors on a heatsink.
- BAL4 101-0013: four 4.7 Ohm 25W resistors on a heatsink.
- BAL6 101-0014: six 4.7 Ohm 25W resistors on a heatsink.
Compatibility and installation
Injector impedance and the required ballast value must be confirmed before purchase. Link specifies the 4.7 Ohm BAL4 and BAL6 packs for injectors between 2 and 6 Ohms and advises contacting Link when injectors are below 2 Ohms. The 1 Ohm BAL and BAL2 choices are different products and must not be substituted without confirming the injector and ECU requirements.
Ballast resistors become hot at high injector duty cycles. Keep them mounted on the supplied heatsink and bolt the heatsink securely to the chassis in a suitable ventilated location away from heat-sensitive parts. Professional wiring and ECU configuration are recommended.
Additional information
| Resistor pack | Single 1Ω 50W – BAL, Twin 1Ω 50W – BAL2, Quad 4.7Ω 25W – BAL4, Six 4.7Ω 25W – BAL6 |
|---|








