Original price was: £81.60.£73.44Current price is: £73.44.
Genuine Link 101-0280 non-contact Hall gear-tooth sensor for crank, cam and speed sensing. Includes a matching DTM3 connector kit and printed instructions. Verify the ferrous target, air gap, pull-up provision, shielded wiring and ECU setup before installation.
Typical lead time: 1–3 working days, subject to supplier stock.
4 in stock
Description
Link Hall Effect crank, cam and speed sensor kit
The Link 101-0280 is a non-contact Hall effect gear-tooth sensor for crankshaft, camshaft, wheel-speed and similar ferrous-target applications. Its adaptive dynamic threshold compensates for changes in target geometry and air gap, supporting reliable sensing from near zero speed up to 15 kHz.
Key features
- Open-collector sinking output with adaptive dynamic threshold
- Near-zero speed sensing up to 15 kHz
- Typical 1.5 mm air gap and M12 × 1.0 mounting thread
- 5–24 V operating range, 30 V maximum input and 6 mA maximum continuous current draw
- IP67 anodised-aluminium housing, -40°C to +125°C operating range
- 1 m 20 AWG flying lead
What’s included
The kit contains one Hall effect sensor, a matching DTM3 male-and-female connector kit with pins and wedges, and printed accessory instructions.
Wiring and installation
Brown is supply voltage, blue is sensor ground and black is the ECU output. Use shielded wiring to reduce electrical interference. This sensor is designed for ferrous trigger wheels and gear teeth; an external pull-up resistor is required unless the ECU provides an internal pull-up. Confirm target dimensions, mounting rigidity, air gap, installation torque and ECU configuration before use. Professional installation and ECU setup are recommended.
Additional information
| Weight | 0.05 kg |
|---|---|
| Dimensions | 12 × 1.5 × 1.5 cm |








