Original price was: £44.40.£39.96Current price is: £39.96.
Genuine Link AVSS thinwall automotive wire pack: 50m total in four colours, 0.5mm² / 20 AWG. For correctly designed low-voltage automotive wiring. Wire only; terminals, connectors and protection hardware are separate.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
Link 50m automotive wire pack
This Link wire pack provides AVSS thinwall automotive wire for building, repairing or extending suitably designed low-voltage vehicle wiring. Manufacturer part number 101-0311 supplies 50m in total across four colours, giving your installer useful identification choices for a custom loom.
Pack contents
- 20m red wire.
- 10m black wire.
- 10m red/green wire.
- 10m green wire.
- AVSS thinwall, 0.5mm² / 20 AWG specification.
Suitable uses
The wire can be used in appropriately designed automotive ECU, sensor and custom electrical circuits where this conductor size and insulation specification are suitable. It is a supply of wire, not a pre-wired ECU harness or a vehicle-specific plug-and-play kit.
Installation and buying checks
Select wire size for the actual current, circuit length, voltage drop, temperature and installation conditions. The 0.5mm² size is not suitable for every power circuit; do not assume it can replace heavier feeds or grounds. Use the relevant equipment and ECU manuals when planning connections.
Connectors, crimp terminals, sleeving, fuses, relays, ECU and sensors are not included. Professional wiring practice, appropriate circuit protection and correct termination are required. MB Developments can advise on custom wiring and installation by enquiry. Supplied quantity is 50m combined, not 50m of each colour.



