Price range: £91.80 through £210.60
Genuine Link flying-lead wiring looms with the ECU connector fitted and the engine end unterminated. Select A or B connector and 400mm, 2.5m or 5m length. One loom supplied; ECUs using both connectors need separate A and B looms. Professional wiring required.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
Genuine Link A and B ECU wiring looms
Build a custom engine-management harness using Link’s pre-assembled flying-lead looms. Each has the appropriate TE Connectivity SUPERSEAL 1.0 ECU connector fitted at one end and unterminated wires at the other. They provide a useful starting point for a professionally built installation without having to terminate the ECU connector yourself.
Choose the connector and length
- A loom: 400mm 0LA / 101-0002, 2.5m 2LA / 101-0005, or 5m 5LA / 101-0008.
- B loom: 400mm 0LB / 101-0003, 2.5m 2LB / 101-0006, or 5m 5LB / 101-0009.
- 400mm is useful for short patch harnesses and adapters.
- 2.5m and 5m provide longer flying leads for custom loom routing.
- Wires are colour coded to match the applicable Link wiring manual.
Compatibility and contents
The A loom supports compatible Link G4X wire-in ECUs. The B loom is the additional connection used by G4X StormX, FuryX and XtremeX; it is not interchangeable with the A loom. Check the exact ECU connector, revision and pin assignments before ordering, including on G5 and earlier G4/G4+ installations.
Two-connector ECUs require both an A loom and a B loom. This page supplies one selected loom, not an A/B pair. The older silver or blue G4/G4+ Storm does not require the B loom. Thunder installations may also require C/D connector kits. These looms do not suit the earlier G4 Atom before G4+.
Installation
These are universal wiring components, not a terminated Subaru plug-and-play engine harness. The ECU, sensors, engine-side connectors, fuse/relay hardware and other loom are separate. Follow the exact ECU installation manual and PCLink documentation. Professional wiring, circuit protection, configuration and tuning are required. Contact MB Developments about custom wiring, installation and setup.
Additional information
| ECU connector | A loom, B loom |
|---|---|
| Loom length | 400mm, 2.5m, 5m |
| Wiring and setup |










