Sale!

Original price was: £1,590.00.Current price is: £1,431.00.

Link JZX90X ECU for compatible manual Toyota JZX90 1JZ-GTE non-VVT-i models. Factory traction control is not supported. Original ECU case reused; setup and tuning required.

Non Stock Item – Ordered In
Typical lead time: 1–3 working days, subject to supplier stock.
SKU: 235-4000 Category:

Description

Link G4X JZX90Link ECU

The JZX90X gives your tuner programmable control of fuelling, ignition and supported engine functions through PCLink. It replaces the factory ECU board in compatible Toyota JZX90 applications, retaining the original loom and ECU enclosure.

Useful features

  • Fuel and ignition maps tailored to your engine.
  • Onboard MAP sensing for engine-load measurement.
  • Data logging for setup and fault investigation.
  • CAN communication with compatible aftermarket equipment.
  • Expansion connections for additional sensors and functions.

Exact application and buying checks

Manufacturer SKU 235-4000: JZX90 Chaser, Cresta and Mark II with the 1JZ-GTE non-VVT-i engine and manual transmission. Match the factory connector to the photographs. This is not the JZX100 VVT-i ECU. Automatic models require individual compatibility confirmation before ordering.

Link also confirms pin compatibility with the non-VVT-i 1JZ-GTE JZZ30 Soarer, but the board does not fit the Soarer-specific ECU case. A suitable enclosure solution must be confirmed before ordering for a Soarer.

Factory traction control is unsupported and its warning light may remain on. Sequential injection needs additional injector wiring. Check the MAP-sensor revision and jumper selection, and calibrate the actual MAP and intake-air-temperature sensors. Electronic-throttle conversion requires the dedicated expansion connection, suitable hardware, wiring and setup; these are separate.

Earlier boards have specific idle-stepper and hot-start issues. Your installer must check the board revision against the latest installation manual. CAN devices require the powered four-pin CAN connection; the older CANPCB cable is incompatible.

Included and installation

JZX90X ECU board, anti-static strap, USB tuning cable, stickers, manual card and registration card. Expansion looms and additional sensors are separate. Professional installation, configuration and tuning are required; a base map is not a finished tune.

We offer installation, setup and custom dyno mapping by enquiry. Sensor packs and custom wiring looms are available separately. Link specifies off-road use; check suitability for your intended use. Read the JZX90X installation manual before installation.

Additional information

Brand

LINK ECU

Explore Link ECU plug-in and wire-in ECUs, wiring, sensors and engine-management accessories at MB Developments. Check the exact ECU, vehicle wiring and required installation components.
CONTACT
💬 WhatsApp ☎ Call Us ✉ Email Us