Price range: £901.80 through £1,398.60
Universal Link G4X MonsoonX wire-in ECU, with ECU-only or official 2.5 m loom and sensor bundle options. Up to four cylinders or two rotors in sequential/direct-spark operation. Professional wiring, setup and tuning required.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
Link G4X MonsoonX universal wire-in ECU
The MonsoonX is a programmable ECU for a properly engineered custom engine-management installation. Choose ECU only or the verified Link wiring-and-sensor bundle below. This is a universal wire-in product: it does not plug directly into an unmodified vehicle loom.
Useful features
- Four injector and four ignition outputs for up to four cylinders or two rotors in sequential/direct-spark operation.
- Six auxiliary outputs and additional inputs compared with the AtomX.
- VVT, closed-loop boost and motorsport functions where the available inputs and outputs allow.
- CAN connectivity, built-in MAP sensor and 512 MB onboard logging.
- Knock input on version 3 or later hardware only; the shared DI4/knock connection must be planned.
Choose your package
ECU only – 127-4000: includes the ECU, quick-start guide, mounting bracket, USB tuning cable and Link stickers. A wiring loom, connector kit and additional sensors are not included in this choice.
ECU and official bundle – 127-9300B: The official 127-9300B bundle adds a 2.5 m A loom, CAN Lambda controller with Bosch LSU 4.9 sensor and 1/8-inch NPT IAT sensor. The ECU has a built-in MAP sensor; this option does not promise a separate external MAP sensor. Confirm pressure range and calibration for the actual hardware.
Engine sensor kit – 127-9800B
MonsoonX ECU 127-4000; 2.5 m A loom 101-0005; IATB air-temperature sensor 101-0048; NTC12 coolant-temperature sensor 101-0077; PS150 pressure sensor 101-0326.
This kit does not include a CAN Lambda controller or LSU 4.9 wideband sensor. The looms require custom wiring; this is not a terminated vehicle-specific harness. Confirm sensor fittings and calibrations for your installation. Image shows the ECU only; the supplied kit contents are listed above.
Installation and support
Professional wiring, configuration and tuning are required. Check the available inputs and outputs against every planned function; features cannot all necessarily be used together. Mount the ECU inside the cabin away from water, heat and ignition interference. New units require supplier activation before running the engine.
Read the MonsoonX quick-start guide and the full wiring and installation manual supplied within PCLink. MB Developments offers custom wiring, installation, setup and custom dyno mapping by enquiry. Extra sensors and services are separate. Link specifies off-road use only, not highway use.
Additional information
| Package | ECU only, ECU + 2.5 m A loom + sensor bundle, ECU + engine sensor kit – 127-9800B |
|---|---|
| ECU wiring & setup (PCLink) |






