Price range: £1,495.80 through £1,755.00
Link G4X plug-in engine management for the exact Nissan application selected. Match engine, version and ECU connector; professional installation, setup and tuning are required.
Choose the vehicle version and ECU-only or NGTRX bundle package below. Included items are listed per option; installation is separate.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
Link G4X plug-in ECU for Nissan Skyline RB
Bring modern engine management to a compatible factory-wired Nissan while retaining an installation based around the original ECU location. Select the exact engine, version and connector shown for each option. A model name or registration year alone is not enough to identify the right ECU.
Useful features
- PCLink software for professional fuel and ignition calibration.
- USB connection for setup, diagnostics and logging.
- Onboard MAP sensing, with installation and calibration checks.
- Configurable engine protection using suitable sensors and correct settings.
- Boost and motorsport functions where the vehicle hardware supports them.
Choose the correct version
The blue-header NGTRX option covers the listed GT-R and non-NEO RB applications. The grey-header NGTTX option is for the listed NEO engines. RB20 wiring, R34 GT-R switch settings and injector ballast need checking. The grey-header NGTTX is not supported for non-GT-R R34 four-wheel-drive models or four-wheel-drive Stagea. It removes factory traction control, with TCS/slip lamps remaining on. Electronic-throttle use requires extra wiring and, for NGTTX, an external controller.
NGTRX bundle – 214-9800B
For the supported blue-header R32–R34 GT-R application, this official Link package includes NGTRX ECU with electronic-throttle support (214-4100), XS expansion loom (101-0106), CAN Lambda kit (125-1000) and CANJST4 cable (101-0198). The expansion loom and CAN connection support the included lambda equipment; installation, configuration and tuning are still required. This is not the grey-header NGTTX package. The selected image shows the ECU only; all bundle contents are listed here.
Installation and setup
Professional installation, pre-start checks and custom tuning are required. A supplied base configuration is a starting point, not a finished tune. Follow the exact installation manual for the delivered ECU revision and verify the vehicle wiring, sensor calibration and trigger setup before starting.
Installation, setup and custom dyno mapping are available by enquiry. Sensor packs, expansion connections and custom wiring looms are offered separately where required. Check the exact option for included items; no additional sensors, adapters or tuning services are included unless expressly listed.
Download PCLink software and setup information. Link specifies these ECUs for off-road use only, not for highway vehicles.
Additional information
| Vehicle version | R32–R34 GT-R / supported non-NEO RB engines – blue ECU header (NGTRX), R34 RB20/25 NEO – grey ECU header (NGTTX), R32–R34 GT-R – blue header NGTRX + CAN Lambda bundle (214-9800B) |
|---|---|
| ECU wiring & setup (PCLink) |






