Price range: £1,318.00 through £1,852.00
HKS LEGAMAX Premium for listed GVB/GVF WRX STI saloons. Choose rear silencers only or the cat-back kit with centre pipes. Four 90mm outlets; variant and later-vehicle conditions apply.
Description
HKS LEGAMAX Premium Exhaust for GVB / GVF
Choose the exact HKS factory kit for the listed Impreza WRX STI saloon application. The rear-only and cat-back choices have different contents and variant conditions.
Choose the system
- Rear silencers only — 31021-AF021: one left and one right rear silencer. No centre pipe is supplied. The manual lists two 60mm gaskets, four M10 × 1.5 bolts (40mm long), four nuts, eight plain washers, four spring washers and one thermal-protection sheet.
- Cat-back with centre pipes — 31021-AF022: one left and one right rear silencer plus the two centre-pipe sections. The manual lists three joint gaskets, six M10 × 1.5 bolts (25mm long), six nuts, twelve plain washers, six spring washers and one thermal-protection sheet.
Features
- HKS S304 stainless-steel main-material specification.
- Four 90mm tail outlets: two left and two right.
- Rear-only pipe specification: 54mm. Cat-back pipe specification: 65mm to twin 54mm sections. These are HKS pipe-section dimensions, not inlet internal measurements.
Application & variant differences
HKS lists CBA-GVB with EJ20 turbo and CBA-GVF with EJ25 turbo, July 2010–August 2014. Match the chassis, engine, original exhaust connections and bumper arrangement.
- GVB rear-only AF021: not compatible with tS, tS Type RA, Spec C or S206.
- GVB cat-back AF022: HKS lists tS, tS Type RA and Spec C as compatible; S206 is excluded.
- GVF: the manufacturer Japanese application table permits tS with either kit. This does not extend the GVB rules to GVF or establish other unlisted special variants.
Later vehicles require exact confirmation: the AF021 manual requests confirmation for vehicles registered from May 2011, and the AF022 manual requests confirmation from July 2011. The current product tables extend through August 2014; later-period fitment is not presented as independently resolved here. Confirm the actual vehicle specification with HKS before ordering.
Installation & heat protection
Follow the exact kit’s HKS fitting instructions. Inspect original rubber hangers and reusable front-joint fittings. Apply the supplied thermal-protection sheet to both bumper sides as shown in the manual, particularly for high-load use.
The AF022 manual notes that some vehicles require heat-shield bending or trimming to obtain approximately 10mm clearance. Check exhaust and bumper clearances after alignment. Professional fitting is recommended. Vehicles, catalysts and original front exhaust components shown in reference images are not included.
Availability & identification
Both kits are currently unavailable from our supplier, with backorders disabled. Select the exact factory part number and system contents required: 31021-AF021 or 31021-AF022.
Additional information
| System | Rear silencers only, Cat-back with centre pipes |
|---|
Brand
HKS









