Price range: £1,132.00 through £1,240.00
HKS LEGAMAX Premium stainless exhaust for listed GRB/GRF WRX STI hatchbacks. Choose AF013 rear section only or AF014 with centre pipe. Four 90mm outlets; special variants and later vehicles require confirmation.
Description
HKS LEGAMAX Premium Exhaust for GRB / GRF
Choose the required factory kit for the listed Subaru Impreza WRX STI hatchback application. These are two complete HKS offerings with different contents, selected by the System option.
Choose the system
- Rear section only — 31021-AF013: one rear exhaust assembly with four tail outlets. The centre pipe is not supplied.
- Cat-back with centre pipe — 31021-AF014: one rear exhaust assembly plus one centre pipe. The fitting manual lists one 65mm gasket, two M10 × 1.5 bolts (40mm long), two nuts, four plain washers and two spring washers.
Features
- SUS304 stainless-steel main construction.
- Four 90mm tail outlets: two left and two right.
- HKS pipe specification: 65mm maximum section, excluding the silencers and tail tips; not an inlet internal measurement.
- HKS lists compatibility with the stock optional STI exhaust finisher for the GRB application.
Application & variant conditions
HKS lists standard CBA-GRB EJ20 turbo hatchbacks, October 2007–August 2014, and CBA-GRF EJ25 turbo hatchbacks, February 2009–August 2014. Match the chassis, engine and existing exhaust arrangement.
R205 and Spec C variants require exact HKS confirmation before selection. The Japanese AF013 note excludes these variants from April 2010, while the English note is broader. AF014 also has a specific R205/Spec C restriction from April 2010. These special applications are not presented as verified here.
The AF014 manual was issued in 2010 and requests confirmation for vehicles from June 2010, while the current product tables extend the standard-model application through August 2014. Later vehicles must be checked with HKS against their exact specification before ordering.
Installation & availability
Check the required kit contents, mating flanges, existing front exhaust and mounting points. Follow the applicable HKS instructions, inspect reusable original fittings and replace worn parts as required. The vehicle in the fitted images and the front pipe/catalyst are not included.
Both choices are currently unavailable from our supplier and backorders are disabled. HKS marks AF013 for planned discontinuation.
Part identification
The rear-only kit is 31021-AF013; the kit with centre pipe is 31021-AF014. Select the exact factory kit needed.
Additional information
| System | Rear section only, Cat-back with centre pipe |
|---|
Brand
HKS









