£946.00
HKS 31019-AF015 Silent Hi-Power stainless cat-back system: centre pipe and rear muffler, 75mm maximum centre-pipe diameter and 120mm tip. Match the listed application.
Out of stock
Description
HKS Silent Hi-Power exhaust system
A vehicle-specific stainless-steel cat-back system, supplied as a centre pipe and rear muffler. Match the exact HKS code and the application conditions below.
Specification
- Manufacturer code: 31019-AF015.
- SUS304 stainless-steel construction; HKS HP Type-S silencer layout.
- 120mm tailpipe diameter.
- 75mm centre-pipe diameter at its largest section, excluding silencer and tip; not a constant-bore or inlet-inside-diameter claim.
Verified application
The verified application is Impreza WRX STI GH-GDB, EJ20 turbo, applied models E and F. HKS states compatibility with the stock rear under-skirt. STi Spec C and Spec C WR-Limited 2004 are untested and are not included in this fitment claim.
Match the applied-model code and actual exhaust flange and hanger layout. Do not select solely from a registration year. The current table and older manual have differing end-month/date wording; no later applied-G or blanket 2007 fitment is inferred.
Contents and installation
- One centre pipe and one main rear muffler.
- One 75mm ring gasket for the joint between supplied sections.
- Two M10 × 1.5 × 25mm bolts, two matching nuts, four plain washers and two spring washers, as listed in the HKS manual.
The original catalyst-side gasket, fasteners, springs and sound rubber hangers are reused as directed by HKS; replace worn original parts separately. A catalytic converter, engine-side exhaust parts, replacement rubber hangers and fitting labour are not stated as included.
Professional fitting is recommended. Follow the HKS manual, align both sections and confirm body, heat-shield and bumper clearance. The GDB instructions note that heat-shield adjustment may be needed where clearance is close. Check joints for leaks after fitting and after a test drive. Modified exhaust sections require a separate compatibility check.
Images
The installed-car image shows the exhaust location; the car and body trim are not included.
Other chassis applications
For the separate GC8 application, see HKS 31019-AF022. These exhausts have different chassis applications and are not interchangeable options.
Additional information
| Manufacturer part number | 31019-AF015 |
|---|---|
| Application | GH-GDB EJ20 turbo, applied E/F; Spec C and Spec C WR-Limited 2004 untested |
| System contents | Centre pipe and rear muffler; see supplied fasteners and reused parts in the description |
| Material and silencer | SUS304 stainless steel; HP Type-S Silent Hi-Power |
| Tailpipe diameter | 120 mm |
| Centre-pipe diameter | 75 mm at the largest section excluding silencer and tip; not a constant bore or inlet internal diameter |
Brand
HKS





