£2,278.00

HKS 11004-AF013 GTIII-RS turbo kit for JDM GRB / GVB / VAB EJ207 STI. Vehicle modification and professional engine calibration required.

Out of stock

SKU: 11004-AF013 Category:

Description

HKS GTIII-RS sports turbine kit

An application-specific replacement turbo kit for the listed Japanese-market EJ207 STI models. The two kit codes use different installation hardware and must not be treated as interchangeable options.

Verified applications

  • Impreza WRX STI CBA-GRB, EJ207: October 2007–March 2014.
  • Impreza WRX STI CBA-GVB, EJ207: July 2010–July 2014.
  • WRX STI CBA-VAB, EJ207: August 2014–April 2020.

HKS developed this kit on JDM vehicles and states that other markets have not been tested. Match the chassis, engine, applied model and installed turbo/manifold arrangement. These dates do not establish compatibility with UK/EU EJ257 cars, engine swaps or other Subaru models.

Kit contents

  • One GTIII-RS turbocharger assembly with actuator.
  • One oil inlet hose, one oil-line adaptor and one oil outlet pipe.
  • Oil outlet, front-pipe and turbo-flange gaskets: one of each.
  • Two banjo fittings, two 14mm banjo bolts, four 14mm copper washers and three 12mm copper washers.
  • Oil-inlet banjo fitting and bolt, heat shield and three M10 x 1.25 studs.
  • One 6mm silicone hose, ten tie wraps, two insulation sheets and the instruction/installation manuals.
  • Additional joint-pipe gaskets (two), spacer and 4mm spacer, three M10 bolts with lock and flat washers, plus two M6 flange bolts.

Installation and tuning requirements

Vehicle modification and professional installation are required. HKS requires suitable fuel control and engine calibration, with fuel-pump and injector upgrades where needed. Check spark-plug suitability and the complete boost-control arrangement before use.

The fitting manual requires modification of the turbo support bracket and checks around the compressor housing, sensor wiring and heat shielding.

No engine management, boost controller, fuel pump or injectors are included in this kit. Have the installer confirm the actuator supplied and calibrate boost for the complete engine setup; this listing does not promise a preset boost value or power output.

The GRB and GVB date ranges above use the overlap of HKS’s chart and fitting manual. Later end dates appearing in the general chart are not assumed to be verified by that manual.

Different application

For JDM GDB applied C–G EJ207 STI, see the separate HKS 11004-AF014 kit. These kits are alternatives for different vehicles, not components to order together.

Brand

HKS

HKS filters, belts, oil caps, turbo kits, exhaust components and turbo-conversion parts for selected Subaru applications. Match the exact HKS part number, chassis, engine and model dates. Turbo conversions may require vehicle modification and professional calibration; check each product’s specific conditions.
CONTACT
💬 WhatsApp ☎ Call Us ✉ Email Us