£79.99
Direnza WSADP12 adapter pair: 5×100 vehicle hub to 5×114.3 wheel, 20mm each, M12x1.25 and 56.1mm bore. WSADP12-2 is the same physical kit.
Typical lead time: 1–3 working days, subject to supplier stock.
Description
Direnza hub-centric PCD adapter pair
A pair of adapters for a matching 5×100 vehicle hub and 5×114.3 wheel installation. These change the wheel mounting pattern as well as adding spacing.
Specifications and contents
- Manufacturer part number: WSADP12.
- Equivalent supplier reference: WSADP12-2; the manufacturer confirms the same physical kit.
- Vehicle hub pattern: 5×100.
- Wheel pattern: 5×114.3.
- Thickness: 20mm per adapter.
- Thread: M12x1.25 on both listed interfaces.
- Manufacturer-confirmed bore: 56.1mm.
- Material: forged 6061-T6 aluminium with hard-anodised finish.
- Supplied as one pair of two adapters, not four.
Application and conversion direction
Direnza lists this hardware for compatible 5×100 Subaru WRX and BRZ hubs using suitable 5×114.3 wheels. Identify the actual hub and wheel specifications: this is not a reverse 5×114.3-hub-to-5×100-wheel adapter, and it is not a blanket fitment claim for every WRX, STI or BRZ.
Checks before purchase and fitting
Confirm hub lip and wheel centre geometry, stud projection, wheel relief-pocket clearance, correct nuts and engagement, brake clearance and tyre-to-body clearance. Check the resulting wheel position and effective offset. No additional wheel-side diameter or manufacturing tolerance is assumed. Use a competent installer and the correct fitting and recheck procedure.
Brand
Direnza





